What are you currently reloading?

[Gunner46]

My glass of beer. I found a load that me, my rifle, and the budget found amicable, so I hit it hard reloading sometime back, because the components were available and prices were just going up. There is no more sighting in, it's just a sight check. If I ever run out of my hand loads (???) I have some Federal close-outs for back up. I'm Good.

 

[Sheltowee]

View attachment 237804
Trying to figure out which of these manbuns I'm gonna kill a elk with this year. 120gr ttsx, 140gr accubond, or 160gr interlock all loaded with H4350. They're all shooting very well out to 475 yards with the ttsx edging the others out slightly in accuracy.

Have been considering the TTSX and Accubond for my 6.5, as well. Have you calculated how far out you are maintaining enough velocity for them to open?

 

[WildWill]

Have been considering the TTSX and Accubond for my 6.5, as well. Have you calculated how far out you are maintaining enough velocity for them to open?

At 475 yards (longest range I have access to) it was sitting at just above 2000 fps about as low as I feel comfortable with the ttsx. Good news is I don't shoot at game over 400 yards so no problem here. Haven't killed anything with the ttsx but I can attest the accubonds are a solid choice.

 

[elkhnter]

Found a 168 TSX load using Varget that my 300 saum loves. Been using up the usually large quantity of Varget that I have.
Honestly, I don’t remember buying all of it!

 

[EastTNHunter]

Found a 168 TSX load using Varget that my 300 saum loves. Been using up the usually large quantity of Varget that I have.
Honestly, I don’t remember buying all of it!

Good problem to have

 

[std7mag]

Finally got to shoot the Ruger 77 MKII in 25-06 that i bought a month ago.
Settled on 120gr Sierra HPBT GameKings over RL19.
Ran a few wet patches in last night, good scrubbing today.

I also shot some of the 9mm Sig V Crowns yesterday.

My Walther PPS really liked the 90gr bullets. The 125gr, not so much.

But my H&K VP9 really liked the 125gr. The 90gr not so much. Lol

Both bullet weights over Alliant BE86 powder.

 

[Salmonchaser]

Smoke was so thick in the Grande Rhonde valley yesterday I hung out in the shop all day loading cartridges.
20- .308 winchester
40 - .338 Jarett
40 - 375 H&H
40- 30/06

 

[FLS]

25-06- Berger 115 VLD Hunters over H1000.
308- 165 Accubonds over 8208 XBR

 

[nhenry]

Primed a bunch of 280 AI brass without having to worry about my supply dwindling for once. Thank God for Scheels.

Going to throw a bunch of powder tomorrow (IMR 4350 and H4831).

 

[Farmerj]

Researching a bunch of reduced recoil .308 Winchester for a friend.

 

[nhenry]

58.8-60.8gr of IMR 4350 under 120gr TTSX. 280 Ackley loads.

 

[JLS]

58.8-60.8gr of IMR 4350 under 120gr TTSX. 280 Ackley loads.
View attachment 241184

I bet those are cooking out of the Ackley.

 

[nhenry]

I bet those are cooking out of the Ackley.

I tested some old max loads from my old 280AI and they were scorching at 3440 avg from this barrel. No signs of pressure.

 

[BackofBeyond]

Haven’t loaded yet, but I did get some ADG .300 RUM brass.

That’s going to happen this winter.

 

[Scrumbag]

Well yesterday I loaded a handful of 9.3x62 with 255gr Geco bullets and N150. Also cleaned some 404 Jeffery brass.

Got some new soft points to try in the 404. 70+ grains of powder a shot that. Big grin though.

Scrummy

 

[mtmuley]

Haven’t loaded yet, but I did get some ADG .300 RUM brass.

That’s going to happen this winter.

I have some ADG I might be convinced to trade for new Remington. mtmuley

 

[BackofBeyond]

I have some ADG I might be convinced to trade for new Remington. mtmuley

I have maybe 50 twice fired (at least) Remington. Plus some Nosler…

 

[antelopedundee]

6.5-06 and 6.5-06AI with 123 grain Absolute Hammers and Reloder 19 or Reloder 22.

 

[BackofBeyond]

6.5-06 and 6.5-06AI with 123 grain Absolute Hammers and Reloder 19 or Reloder 22.

Did you fireform your own brass for the AI? Did you start with plain old .30-06 brass or can you cheat a step and start with .280 AI?

Just curious.

 

[Farmerj]

Starting to work on my .260 Remington savage.

Decided to try casting the chamber to get a feel for freebore before shooting.

Should like the 140-150 gr bullets from what I’m seeing.