antelopedundee
Well-known member
I fireformed my own from .270 Win brass, .25-06 brass or 6.5-06 Quality Cartridge brass.
What are you currently reloading?
- Thread starter VikingsGuy
- Start date
antelopedundee
Well-known member
I've often thought of buying a cheap .270 Win., converting it to .270AI and fireforming about 500 cases. Then I would be able to trim them to 2.494 and have 6.5-06 cases of the proper length. AI cases hardly ever grow in length once they're formed. I've never tried resizing .280AI cases, but the less you need to reduce neck diameter the better. Using .30-06 cases would be a 2 step process. .30 - .28 - .26
BackofBeyond
Well-known member
That’s what I was thinking. If you could neck down a .280 AI, you may be able to skip the fire form.
I know absolutely nothing about the 6.5-06 AI round, but it’s piqued my interest.
If I ever do a 6.5, it will be this. mtmuley
antelopedundee
Well-known member
Both the .270 Win and the .280 Rem are about 0.050 longer than the .30-06 and all of its offspring. The .280 Rem has its increased length in the base to shoulder while the .270 Win has it added to neck length. So in addition to resizing the neck of the .280, you'd also need to move the shoulder back by about 0.050 inches. After fire forming the AI case usually ends up being 0.012 - 0.015 inches shorter than the parent .30-06 case. Another option is to size the .270 case [sans expander ball] in a .25-06 die fire form using the fast pistol powder method or maybe close to half a case full of something like 2400. You should be able to chamber a sized .270 case in a 6.5 -06 chamber without the issues that excessive neck length can cause. Could be one might have to drop down to a .24-06 sizing die.
std7mag
Well-known member
Today was spent loading 185gr Sierra JHP for the 45ACPs i have.
Plus some 90gr Sig V Crowns for the Walther PPS in 9mm.
Plus 125gr V Crowns for the H&K VP9.
Along with internet searching for scope, rings, base, dies, & brass for the new Weatherby Mark V Weathermark LT in 7mm Weatherby i picked up yesterday.
Plus some 90gr Sig V Crowns for the Walther PPS in 9mm.
Plus 125gr V Crowns for the H&K VP9.
Along with internet searching for scope, rings, base, dies, & brass for the new Weatherby Mark V Weathermark LT in 7mm Weatherby i picked up yesterday.
BackofBeyond
Well-known member
Loaded up 5 - .30-06 with Varget and the 137gr. Hammer Hunters yesterday. Using the Barnes load data for the 130 gr. TTSX I took the max (56.5 gr) and progressively dropped back .5 gr each case - case #5 has 56.5 gr, case #1 has 54.5 gr.
I'm trying to work up a load for my dad's '06 that he handed down. It's a early 80's M70 Carbine. 20" pencil barrel, super light, great to carry; can be a bit punishing to shoot for an extended amount of time.
I'm trying to work up a load for my dad's '06 that he handed down. It's a early 80's M70 Carbine. 20" pencil barrel, super light, great to carry; can be a bit punishing to shoot for an extended amount of time.
Farmerj
Well-known member
- Joined
- Dec 12, 2021
- Messages
- 1,072
Same combo I’m using in my .280 Remington setups.
The Hedgehog
Well-known member
tonight 6.5 prc, New ADG brass, .262 mandrel run through it, Fed 210M primer, 56.5 RL26 and a 139 scenar. 50 rounds for plinking on the weekend. Will tweak powder charge next summer after I have 300 of the ADG brass shot once, but I'm getting around 1/2" five shot group at 200m so it's as good as I can ask for.
BackofBeyond
Well-known member
Ya, I guess that’ll do. If your into that kind of thing.
BackofBeyond
Well-known member
What kind of velocities are you getting with the 17” barrel? More or less of a drop than you expected?
109 absolute hammer is 3300
140 Berger goes 2820
BackofBeyond
Well-known member
That's really not that bad. Not really sure why I was thinking it would be more.
Mtnhunter1
Well-known member
Loper hunt?
Going to try. The Hammer guys took one to Africa. Got some good data from Steve. mtmuley
Similar threads
