One gun I do miss
What's your elk rifle and cartridge?
- Thread starter Stray Horse
- Start date
One gun I do miss
CTELK83
Active member
Same, but Mathews bow.
Rifle would be Winchester 338 win mag or kimber 7mm. Both w nosler accubonds
Not Broadway Joe
New member
I took my first two cows with a T/C Venture 7mm-08 using 140 grain particians. Both taken at about 160 yards broadside. I have passed up on two rear quartering shots at 225 and 250 yards on bulls because I didn't have faith in the punch of that combo. This was also my first big game rifle and wanted something low recoil.
So now I bumped up to a Browning Xbolt 300 Win Mag.. cause I am a recoil wuss! Shooting Barnes Ttsx in 165 which has nearly as good ballistics as the ttsx 180g out to 400 yards (out to 500 the 180 is significantly better). I swear the better pad plus muzzle brake have the recoil feeling less than my 7mm-08, and I'd take that quartering shot on a bull every day with the win mag.
So now I bumped up to a Browning Xbolt 300 Win Mag.. cause I am a recoil wuss! Shooting Barnes Ttsx in 165 which has nearly as good ballistics as the ttsx 180g out to 400 yards (out to 500 the 180 is significantly better). I swear the better pad plus muzzle brake have the recoil feeling less than my 7mm-08, and I'd take that quartering shot on a bull every day with the win mag.
Western Traveler1
Well-known member
Last edited:
cahunter805
Well-known member
- Joined
- May 27, 2014
- Messages
- 2,527
Brockel
Who screwed that one together? .081 freebore? What brass you running? That’s some good speed with 4831 also. I run H1000 currently in mine with a 140 hybrid at 3040. Sure is a fun cartridge!
Who screwed that one together? .081 freebore? What brass you running? That’s some good speed with 4831 also. I run H1000 currently in mine with a 140 hybrid at 3040. Sure is a fun cartridge!
rtraverdavis
Well-known member
- Joined
- Oct 20, 2016
- Messages
- 4,078
Savage 116 Weather Warrior in 7mm Rem shooting 160 Accubond hand loads topped with a VX3i 4.5x14x40. Been a great gun and a hell of a shooter for an unmodified stock rifle.
Three at 100 yards:
Three at 100 yards:
Mica Man
Well-known member
Shared this picture on a previous thread of one of my elk killers. 280 mtn rifle I've owned for the last 25 years but gave a facelift to a couple years back. Realize I like killing elk and enjoy using different weapons. I've killed them with a 6mm Rem, 243 Win 
280 Rem, 350 Rem, 54 cal muzzle loader and various bows over the years. Looking forward to this fall as I just purchased a new bow and a 28 nosler!
280 Rem, 350 Rem, 54 cal muzzle loader and various bows over the years. Looking forward to this fall as I just purchased a new bow and a 28 nosler!1st Elk model 742 Remington 30-06, next few pre-64 Winchester model 70 in a 270, 3 with a Rugger 243, 1 with a 30 Gibbs made off Springfield, several with Smith Wesson model 1500 deluxe in 300 win mag, 2 with a 30-06 made off an old spring field, 3 with a 25-06 sako, several with model 700 Remington 7mm mag , 1 with a 257 Roberts. I think that's all
Mtnhunter1
Well-known member
Like I stated earlier in this post, I use various rifles. It all depends on what rifles I am playing around with. I guess that I have been looking for that "ONE" rifle that checks all the boxes for me.
Here are a few that from the last few years.
2014: T/C encore with custom Match Grade Machine 25" 7x57AI barrel, Zeiss 3x9 shooting 154gr Hornady Interbonds at 2,890fps.
2015: T/C Encore with 26" Custom Shop 7mm RM barrel, Sightron Bigsky 4.5-14AO, 175gr Nosler partitions at 2,870fps
2016: Custom Winchester Mdl 70 7mm RM 26" barrel, Leupold VX-III 4.5-14AO, 160gr Failsafe at 3,040fps
2017: Older gen Kimber 84L Montana 24" barrel 280AI, Leupold VX3 2.5-10 B&C. 160gr Nosler accubonds at 2,910fps. I really like this rifle! Light weight, bomb proof and extremely accurate. It is a keeper!!!
Here are a few that from the last few years.
2014: T/C encore with custom Match Grade Machine 25" 7x57AI barrel, Zeiss 3x9 shooting 154gr Hornady Interbonds at 2,890fps.
2015: T/C Encore with 26" Custom Shop 7mm RM barrel, Sightron Bigsky 4.5-14AO, 175gr Nosler partitions at 2,870fps
2016: Custom Winchester Mdl 70 7mm RM 26" barrel, Leupold VX-III 4.5-14AO, 160gr Failsafe at 3,040fps
2017: Older gen Kimber 84L Montana 24" barrel 280AI, Leupold VX3 2.5-10 B&C. 160gr Nosler accubonds at 2,910fps. I really like this rifle! Light weight, bomb proof and extremely accurate. It is a keeper!!!
Last edited:
C&C Gunworks our of Bowman,ND. I went with a. little longer freebore since I installed a Wyatt’s. I can get 3150 FPS with h1000 but h4831 was more accurate for me. It’s quickly becoming my favorite gun to shoot. Recoil is very mild
Dougfirtree
Well-known member
My elk (and everything else) rifle. M-70 fw in 7mm-08. Leupold VX 3, 2.5-8x36. Now shooting 140 grain E-Tips. I have to admit, I hate wing safeties (and especially loud clankers like this one), but otherwise the rifle is just about perfect.
Badger_55
Active member
- Joined
- Feb 21, 2016
- Messages
- 311
I do not have any pics on the computer will try and get some but I use Browning Hell's Canyon Long Range 300WinMag with Choice Ammo 200gr Nosler AB. I have a Leupold VX5HD 3.5-15x44 windplex. Really have enjoyed this gun. I also have a 300 WSM BLR that I shoot 180gr Nosler AB with that. I really enjoy that gun in the brush but just wanted some more consistent range. Definitely satisfied with the Hell's Canyon Long Range out west. Choice Ammo has treated me good as well.
Gut Shot
Well-known member
Don't have any pics. Ruger Hawkeye synthetic stainless in 338 Federal. Trigger is done to 3.5lbs crisp and it is topped with a Leupold VX-III 2.5-8x.
Brian in Montana
Well-known member
I'm a little more of a bow hunter when it comes to elk, but mostly in the past I've used a .300WM.
The last couple years I've been trying to turn my Tikka T3X into something of an all purpose, lot's of mountain hiking sort of tool. Its a .308 topped with a Leupold 3x-9x VX-2 and last year my load was a 165gr Accubond with 42grns of H4895 pushing it down the tube. I hunted with that pretty exclusively last year but didn't get within striking distance of an elk I wanted to shoot. It did perform nicely on a big mulie deer at 310yds hough. I'm going to use the same set up next year but probably a different load. And I'm leaning toward 165gn Federal TBT's. I seem to be able t push them a little faster than ABs w/o losing accuracy.
The last couple years I've been trying to turn my Tikka T3X into something of an all purpose, lot's of mountain hiking sort of tool. Its a .308 topped with a Leupold 3x-9x VX-2 and last year my load was a 165gr Accubond with 42grns of H4895 pushing it down the tube. I hunted with that pretty exclusively last year but didn't get within striking distance of an elk I wanted to shoot. It did perform nicely on a big mulie deer at 310yds hough. I'm going to use the same set up next year but probably a different load. And I'm leaning toward 165gn Federal TBT's. I seem to be able t push them a little faster than ABs w/o losing accuracy.
Last edited:
D
Deleted member 28227
Guest
Is it a left handed action, I have a RH action but LH laminated stock... wish someone would make a synthetic stock righ action LH stock, but no one does that I have seen.
Given the severely limited number of LH models out there I think I might have to go full custom if I ever have the money.
cahunter805
Well-known member
- Joined
- May 27, 2014
- Messages
- 2,527
Very nice setup! Mine will run faster also but accuracy started to open a bit. Recoil is very mild and almost non existent with a muzzlebrake.
What brass are you running?
