What are you currently reloading?

[Rob96]

Thursday I will be loading up some 255gr Keith SWC Missouri bullets and some 250gr Hornady XTP's for my new Henry Big Boy X in 45 Colt. Will be using True Blue and unique.

 

[BackofBeyond]

First up will be settling on a load I began testing last year for my 300 WBY, which I’ll be using for elk this year. 152 Hammer Hunters and somewhere in the 88-90 grain-zone of RL26.

That’s got to be an absolute screamer. What kind of velocity do you expect?

 

[Laelkhunter]

.270 Win 56.5 RL 19 with a Barnes 130 TTSX
30/06 55.0 IMR-4350 with a Barnes 168 TTSX
.340 Wby 87.0 RL 19 with a Barnes 225 TTSX

 

[hank4elk]

Nothing unfortunately.
I had a buddy who loaded for me & I trusted. He died working up a new load for my -06 12 years ago and it took 2 years to get my brass back.
Been waiting for my bro to send me the -06 set up my uncle gave me. Also 12 years ago.

I was resigned to just buying factory ammo and now that is as rare as bullets, powder & primers.

 

[rtraverdavis]

That’s got to be an absolute screamer. What kind of velocity do you expect?

Somewhere in the 3450-3500 range. I’m pretty much out of case capacity at 90 grains.

 

[D4570]

Lots!
But today I just cast up some 303 gr .452, gas check hard cast water-cooled 45 LC.

 

[EastTNHunter]

Lately…
-9mm, unique, 124 rn
-30-06 (Tikka T3), I4350, 165 NAB
-6.5 Grendel (AR), H4895, 123 SST
-6.5 Grendel (Howa Mini), Tac, 129 Hornady Interlock ; H4895, 129 NABLR ; RL7, 85gr Sierra Varminter

-Been fighting through load development on my .270 Win (Savage 116 w/new 24” Criterion sporter). Found that it doesn’t like Fed 210 primers, so kinda starting over. I was being stubborn and trying to make it like something that it didn’t like due to component shortages, and ended up wasting a bunch of components instead.

 

[nimrod_gn]

Just got custom 280AI back from smith so will start working up loads with 140 gr Absolute Hammers. Next one coming off the line from the Smith is a 338 Mega (Sherman) and will start that one with a 250 gr Badlands Super Bulldozer2

 

[Hammsolo]

The realization that I shoot some pretty boring shit. I was raised to be ultra practical… 22 (pistol rifles), 40 S&W, 6.5 cm, 300 wm, and 12 ga. Everyone was purchased for a specific reason, and no more. Fack, I’m lame. Time to talk to my wonderful wife about my need for a moose and up gun! She believes they’re an investment. Why don’t I buy more…?

 

[BackofBeyond]

The realization that I shoot some pretty boring shit. I was raised to be ultra practical… 22 (pistol rifles), 40 S&W, 6.5 cm, 300 wm, and 12 ga. Everyone was purchased for a specific reason, and no more. Fack, I’m lame. Time to talk to my wonderful wife about my need for a moose and up gun! She believes they’re an investment. Why don’t I buy more…?

You need a lever gun obsession. I'll sell you mine, cheap. Bargain at twice the price.

 

[Hammsolo]

You need a lever gun obsession. I'll sell you mine, cheap. Bargain at twice the price.

Who was fully building that badass stainless and laminate lever gun on here? That rifle made me feel like a 16 year old that just walked by the yoga room.

 

[p_ham]

Who was fully building that badass stainless and laminate lever gun on here? That rifle made me feel like a 16 year old that just walked by the yoga room.

 

[BackofBeyond]

Who was fully building that badass stainless and laminate lever gun on here? That rifle made me feel like a 16 year old that just walked by the yoga room.

The hot yoga room too...

 

[Irrelevant]

Reading:

Reloading: .270

Both hammer hunters and barnes ttsx, but where the heck is every finding powders? I'm down to a 1lb of H4350 and 1lb Ramshot Hunter.

 

[RaiderRich]

Being new to reloading and finding powder/primers/etc tough, I have managed to get my hands on some Staball 6.5 and found some load data for 120gr TTSX with that for 7mm-08. I was able to get my hands on CCI #200 primers. We have 3 7mm-08 rifles in the house so hopefully I can find a load that works in one of them. I still plan on getting some 131gr Hammer Hunters and when I can beat the masses to it, some Varget and magnum primers. Money is tight with fuel being so high and I drive between Reno and Vegas for work occasionally. Damn inflation screwing with my hobbies.

 

[golfer]

Finishing up 180AB in the 300wsm. Just gotta get enough velocities for a cds dial on the scope. Then working on where my 257wby seeing where it likes torque on the new stock. I think I may have to look into getting into some new cartridge that will like rl-26 or h1000.

 

[BackofBeyond]

Finishing up 180AB in the 300wsm. Just gotta get enough velocities for a cds dial on the scope. Then working on where my 257wby seeing where it likes torque on the new stock. I think I may have to look into getting into some new cartridge that will like rl-26 or h1000.

Because you have an overabundance of both R-26 and H1000???

 

[D4570]

Finishing up 180AB in the 300wsm. Just gotta get enough velocities for a cds dial on the scope. Then working on where my 257wby seeing where it likes torque on the new stock. I think I may have to look into getting into some new cartridge that will like rl-26 or h1000.

My 8mm RM LOVES R-26 and 220 series 3100 fps+.
We can almost never get it here.

 

[golfer]

Because you have an overabundance of both R-26 and H1000???

I have some yes, but currently just not shooting them outta my rifles at the moment.

 

[golfer]

Because you have an overabundance of both R-26 and H1000???

Natchezss had rl-26,17,23 and 15 in stock today. Hodgdon had h1000 in stock.