noharleyyet
Well-known member
They came from Kevin Weaver with the initial build...same ceracoat as rifle metal. A feeding issue was also resolved along with the new Stocky VG
Offseason Tinkering
- Thread starter noharleyyet
- Start date
OntarioHunter
Well-known member
- Joined
- Sep 11, 2020
- Messages
- 5,980
I switched the stock on my 404 Jeffery to something used I picked up online. Went from this one that I did up last year when I built the rifle:
To this.
The new used stock didn't have any reinforcement and very little bedding. An internal crack had already started between the trigger box and magazine. So I decided to add crossbolts and a steel pin through the stock wrist. I've never done anything like that before. Made a drill jig for the wrist pin using my Shopsmith multitool. Here the stock is ready to be drilled.
I modified a pair of Winchester Safari Express crossbolts so less wood would need to be removed.
And here is the stock in a jig on the Shopsmith as I finish countersinking for heads of crossbolts.
After the action was fitted to the stock (required shortening the rear action screw and removing metal from top of mag box), I did some serious action bedding fore and aft with JB Weld. Then I stripped the old finish and used Linspeed oil to complete the project. Switched my Springfield's former 1" 3x Weaver scope for a new 1-4x "tactical" 30mm Bushnell with a lower one-piece base.
To this.
The new used stock didn't have any reinforcement and very little bedding. An internal crack had already started between the trigger box and magazine. So I decided to add crossbolts and a steel pin through the stock wrist. I've never done anything like that before. Made a drill jig for the wrist pin using my Shopsmith multitool. Here the stock is ready to be drilled.
I modified a pair of Winchester Safari Express crossbolts so less wood would need to be removed.
And here is the stock in a jig on the Shopsmith as I finish countersinking for heads of crossbolts.
After the action was fitted to the stock (required shortening the rear action screw and removing metal from top of mag box), I did some serious action bedding fore and aft with JB Weld. Then I stripped the old finish and used Linspeed oil to complete the project. Switched my Springfield's former 1" 3x Weaver scope for a new 1-4x "tactical" 30mm Bushnell with a lower one-piece base.
Heck yeah glad to hear that. What was the fix?
noharleyyet
Well-known member
Scope tracks...
Load? mtmuley
noharleyyet
Well-known member
180 Accubond/SuperFormance powder…3072 fps
Killer for sure. mtmuley
grizzly63
Well-known member
Range?
noharleyyet
Well-known member
100 yards.
noharleyyet
Well-known member
The plan is to produce a drop chart and confirm.
