Bowhuntr14
Member
- Joined
- Jun 3, 2020
- Messages
- 26
Woodworking Hunt Talkers?
- Thread starter hansontyrel
- Start date
TheBenHoyle
Well-known member
I love this. Gotta keep those forestry degrees from getting dusty.
Some nice work being done. I'm currently ship lapping and wiring my garage. My cousin cuts the boards on his mill, then I dry cut them and needed.
Used wood equipment is crazy high right now.. trying to get my hands on a used 3 hp shaper, but .. yeah.. maybe next year prices will get better.
Used wood equipment is crazy high right now.. trying to get my hands on a used 3 hp shaper, but .. yeah.. maybe next year prices will get better.
mdunc8
Well-known member
Finally got a break in the weather to try out some new ideas for fly boxes. 
Carnage2011
Well-known member
Some phenomenal work on here. Here’s a boat a good friend and I slapped together. He’s the brains and I provide free labor. 
BrentD
Well-known member
That is one sweet boat, Carnage. What sort of wood is that?
I'd love to use that as my go to duck boat!
What is the piece in the bow all about? And explain those chairs.
You guys do not lack for creativity! (and serious skills)
I'd love to use that as my go to duck boat!
What is the piece in the bow all about? And explain those chairs.
You guys do not lack for creativity! (and serious skills)
Carnage2011
Well-known member
Most of that is zebra wood. We stained the outside with a mahogany to make it pop with the reddish color.
The green colors on the lean bars are copper. We made the lean bars out of a plywood and then vacuum sealed the copper onto it and used resin to seal them. A lot of resin!
The storage compartments under the seats are also copper.
Gunnels and seats are Ash. The gunnels are tricky because they need to bend, but also be strong enough to help with the integrity of the boat. We used a steamer to heat them and then bend them.
slatebuilder
Well-known member
- Joined
- Jan 27, 2018
- Messages
- 621
noise makers in the works....
Looks good so far. Always wanted to make a few calls. Do you have a supplier you like to use to get some of the components (excluding wood)?
slatebuilder
Well-known member
- Joined
- Jan 27, 2018
- Messages
- 621
Shipleys outdoors in Kentucky has been fantastic.
slatebuilder
Well-known member
- Joined
- Jan 27, 2018
- Messages
- 621
It’s been bench and counter top week this week.
LuketheDog
Well-known member
Cool, do you sell those? I need a slate call...
LuketheDog
Well-known member
Well, I prefer wood, but since it's so stinking expensive right now I decided to fire up the welder! This one is in progress, I'll update when it's done...
Otto Matic
Well-known member
- Joined
- Jan 3, 2021
- Messages
- 686
Jesus was a "carpenter"! I'm just a "wood butcher"! LOL!
Youngest bought a house that had a 2 room shack in the back yard. Way too small and far gone to refurbish, so down it came.
There was quite a bit of shiplap and about a dozen rough cut, unfinished 2"×6"×18' used as lath for the cedar shingles.
Needing something to keep me busy, I stumbled into some sliding barn door hardware and thought about the shiplap!
This is the view from the dining room.
This is the view from the den.
Since we're talking "handmade" and "noise makers", thought I'd throw these in the mix.
They are "wingbone yelpers" made from the wing bones of turkeys I've taken.
...and "Yes!", several birds I've taken I've called in with other "yelpers" I've made.
Youngest bought a house that had a 2 room shack in the back yard. Way too small and far gone to refurbish, so down it came.
There was quite a bit of shiplap and about a dozen rough cut, unfinished 2"×6"×18' used as lath for the cedar shingles.
Needing something to keep me busy, I stumbled into some sliding barn door hardware and thought about the shiplap!
This is the view from the dining room.
This is the view from the den.
Since we're talking "handmade" and "noise makers", thought I'd throw these in the mix.
They are "wingbone yelpers" made from the wing bones of turkeys I've taken.
...and "Yes!", several birds I've taken I've called in with other "yelpers" I've made.
BrentD
Well-known member
OleRedbeard
Well-known member
There are some seriously talented folks on here. During the winter I like to piddle around with making stuff like this. I've built 8 or 10 longrifles so this was a jump from the norm with the box and everything. Fun project though.
Attachments
-
IMG_20210305_155535_688.jpg -
IMG_20210305_155535_715.jpg -
IMG_20210305_155535_721.jpg -
received_121582293216565.jpeg -
received_178436727126750.jpeg -
received_253423486393076.jpeg -
received_3694904840592951.jpeg -
received_458681305182429.jpeg -
received_220358743121290.jpeg -
received_210673224173355.jpeg -
received_3676825415685784.jpeg
mdunc8
Well-known member
Two more headed out the door...
Kaitum
Well-known member
My first picture frame. Black cherry from my dad's shop in PA years ago. I've been moving it around the West for a long time pondering the right project. I finally found one.
OntarioHunter
Well-known member
- Joined
- Sep 11, 2020
- Messages
- 5,980
Very nice. That stuff is tricky to work with, especially in the router. The sugar sap plugs up blades and smokes the wood.
LuketheDog
Well-known member
I'm pretty stoked on how my new staircase is taking shape, especially the handrail, the temporary stair treads will come out soon and my pretty maple ones will match the railing after sanding and oil...then to finish the awful job of chipping out the rest of the floor tile so I can install the wood floor.
Similar threads
