Do you use a scope with target turrets?

Do you have a scope to make field vertical adjustments on turrets?

  • Yes

    Votes: 88 73.9%

  • No

    Votes: 31 26.1%
  • Total voters
    119
  • Poll closed .
psinclair said:
I gave that old Sako to my youngest son, who is the Government Trapper at Harlowton. It's on it's 11th barrel now. It's also a 22CM with a 1-7" Bartlein.

Hope all is well Kurt, I'll have to stop and visit next time I'm over that way..
Click to expand...
22cm is a lightning rod for coyotes. . .

What kind of barrel life did you get out of the 220?
 
Forkyfinder said:
22cm is a lightning rod for coyotes. . .

What kind of barrel life did you get out of the 220?
Click to expand...
2,000 give or take. Some lasted longer than others. I've tried just about every make of barrel out there. My last 25-30 barrels have been made by Bartlein. Tracey is a good friend of mine, and in my humble opinion makes the finest barrels. If you ever get to Wisconsin, tour the plant. It's very impressive.

I've wore out four 22CM barrels. They've lasted about 2,000 rounds as well. I'm currently testing Bartlein's new MOD400 barrels on two different 22CM's.
They're a harder alloy (more nickel) than SS (4140) barrels. I'm hoping for an increase of 50% on barrel life. As of this morning, one of those has 1855 rounds through it and is still making velocity and shooting in the .2's and .3's.
 
I voted "yes" because I do have them on most of my rifles.

Most of the time I just use Kentucky windage and elevation. I trust my experience with the rifle more than I trust the repeatability of the turrets. Hunting ground squirrels and prairie dogs for hours making adjustments constantly it seams eventually your zero gets off. For me personally I am more consistent pushing the crosshairs up and over and only using the turret adjustments sparingly to reach way out there and touch something.
 
Firedude said:
I voted "yes" because I do have them on most of my rifles.

Most of the time I just use Kentucky windage and elevation. I trust my experience with the rifle more than I trust the repeatability of the turrets. Hunting ground squirrels and prairie dogs for hours making adjustments constantly it seams eventually your zero gets off. For me personally I am more consistent pushing the crosshairs up and over and only using the turret adjustments sparingly to reach way out there and touch something.
Click to expand...
Hair plus air is a repeatable adjustment.
 
Firedude said:
Most of the time I just use Kentucky windage and elevation. I trust my experience with the rifle more than I trust the repeatability of the turrets. Hunting ground squirrels and prairie dogs for hours making adjustments constantly it seams eventually your zero gets off. For me personally I am more consistent pushing the crosshairs up and over and only using the turret adjustments sparingly to reach way out there and touch something.
Click to expand...
A quality turret is 100% repeatable. There is absolutely no way to use “Kentucky windage” at 300+ yards with more “trust” or consistency than a well made riflescope. YMMV.
 
The Hedgehog said:
A quality turret is 100% repeatable. There is absolutely no way to use “Kentucky windage” at 300+ yards with more “trust” or consistency than a well made riflescope. YMMV.
Click to expand...
Exactly. You can print off a chart and check any scopes ability to twist turrets and still return to zero. Most scopes made by reputable companies are designed to be more precise than any shooter I know!
 
The Hedgehog said:
A quality turret is 100% repeatable. There is absolutely no way to use “Kentucky windage” at 300+ yards with more “trust” or consistency than a well made riflescope. YMMV.
Click to expand...
rjthehunter said:
Exactly. You can print off a chart and check any scopes ability to twist turrets and still return to zero. Most scopes made by reputable companies are designed to be more precise than any shooter I know!
Click to expand...
You guys NEED (as in absolutely have to have or cant do it) adjustable turret at 300?

That being the case I get it now. If you can't push 2 to 6 inches high and an inch over the suggested rules make complete sense now.
 
Last edited:
Firedude said:
You guys NEED (as in absolutely have to have or cant do it) adjustable turret at 300?

That being the case I get it now. If you can't push 2 to 6 inches high and an inch over the suggested rules make complete sense now.
Click to expand...
I guarantee I'd be more consistent and accurate than you by using turrets. Obviously I don't need them at 300 yards. But it's more accurate without question.
 
Firedude said:
You guys NEED (as in absolutely have to have or cant do it) adjustable turret at 300?

That being the case I get it now. If you can't push 2 to 6 inches high and an inch over the suggested rules make complete sense now.
Click to expand...
😂 you dont need a car. Do you walk to work?
 
Firedude said:
You guys NEED (as in absolutely have to have or cant do it) adjustable turret at 300?

That being the case I get it now. If you can't push 2 to 6 inches high and an inch over the suggested rules make complete sense now.
Click to expand...
No, you don't "get it".....

Maybe you should glue your 20 yard pin in place and just use holdover for all of your bow shots.
 
I think the adjustable turrets are great IF you have the time to range the animals then adjust accordingly. My hunting doesn't allow me the extra time. The guess point and shoot method works
 
The Hedgehog said:
One thing I really NEED is to stop reading what idiots type on the internet.
Click to expand...
There's a very simple test that I've seen a lot of guys lose faith in very nice scopes with.

Crank that thing all the way to one side. Then up. Then over to the other side. All the way down and repeat. Go around that square 10 times. Reset to zero and shoot.

When it's sub zero and I'm shooting coyotes I trust the mil dots in my scope way more than cranking that frozen thing up and down.
 
Firedude said:
There's a very simple test that I've seen a lot of guys lose faith in very nice scopes with.

Crank that thing all the way to one side. Then up. Then over to the other side. All the way down and repeat. Go around that square 10 times. Reset to zero and shoot.

When it's sub zero and I'm shooting coyotes I trust the mil dots in my scope way more than cranking that frozen thing up and down.
Click to expand...
I leave all that cranking to you and your guys.
 
Firedude said:
There's a very simple test that I've seen a lot of guys lose faith in very nice scopes with.

Crank that thing all the way to one side. Then up. Then over to the other side. All the way down and repeat. Go around that square 10 times. Reset to zero and shoot.

When it's sub zero and I'm shooting coyotes I trust the mil dots in my scope way more than cranking that frozen thing up and down.
Click to expand...
I box test all of my scopes....never had one fail. Maybe "very nice" to you is different than what I use.

If I told you how many coyotes I've killed with a rifle in subzero temps, you wouldn't believe me.
 
psinclair said:
I box test all of my scopes....never had one fail. Maybe "very nice" to you is different than what I use.

If I told you how many coyotes I've killed with a rifle in subzero temps, you wouldn't believe me.
Click to expand...
I’d ask but then when told me I’d have to tell you that you’re being arrogant even though I asked. I’m gonna assume it’s a astonishing amount and please keep killing them
 
You must log in or register to reply here.

Similar threads

S
New scope for a 30/06
2
Replies
30
Views
894
Robert N
R
C
Leupold VX-6HD 3-18x50mm Firedot
Replies
1
Views
936
Chingon
C
G
Why can't I figure out my scope? Am I really that dense?
2 3
Replies
40
Views
2K
yakimanoob
Y
N
Maximum point blank range and sighting in at particular distances...
2 3
Replies
41
Views
2K
Wind Gypsy
W
elkhuntinfool78
Leupold scopes love or hate em?
4 5 6
Replies
106
Views
8K
Hotlava
H

Latest posts

Forum statistics

Threads
113,667
Messages
2,028,908
Members
36,275
Latest member
johnw3474

Share this page

Back
Top