Woodworking Hunt Talkers?

[beagle001]

Great thread. Did some woodworking in high school and trade school, then went to build pole barns for a bit and lost some of those finer skills, then went back to farm and lost most of the rest of the skills.

Preparing to remodel my grandpa’s house before we move in and I’m hoping to rekindle some of my lost skills… getting started buying tools is a B, but we will see what I come up with. Thanks for the motivations, folks!

 

[BrentD]

meager skills, but I am proud of it. Just a chunk of ash from a stump.

 

[Redmt]

meager skills, but I am proud of it. Just a chunk of ash from a stump.

View attachment 272572

That is amazing. You were able to get a can of Stout out of a stump! Think of what you could have done with the whole tree.

 

[LuketheDog]

I jumped on the epoxy bandwagon this year and turned a cracked up old maple round from my wife's childhood home into a side table. I've never done epoxy before, what a pain in the butt that was...

 

[BenP]

Had time to finish up a lathe tree to add to the wife's collection.

 

[OntarioHunter]

Had time to finish up a lathe tree to add to the wife's collection.

View attachment 273839
View attachment 273843

Guess she's starting a gourmet snowcone franchise?

 

[schmalts]

I sawed up some swamp ash I took off my land. Had a few nice crotch chunks that made for some real nice shade change figuring. I made a couple guitar bodies out of them. Lots of sanding. Dying.. sanding... sealing.. sanding.. grain filling. Sanding sanding sanding. On both if these I sprinkled a little colored glitter on them and finger wiped until it stuck only in the deep grain. Finished with automotive 2 part urethane.

 

[schmalts]

I sawed up some swamp ash I took off my land. Had a few nice crotch chunks that made for some real nice shade change figuring. I made a couple guitar bodies out of them. Lots of sanding. Dying.. sanding... sealing.. sanding.. grain filling. Sanding sanding sanding. On both if these I sprinkled a little colored glitter on them and finger wiped until it stuck only in the deep grain. Finished with automotive 2 part urethane. View attachment 273935View attachment 273936View attachment 273937View attachment 273939

New video by Patrick Schmitt

photos.app.goo.gl

 

[ignorethefringes]

New video by Patrick Schmitt

photos.app.goo.gl

That orange one is gorgeous. You ever make and sell those?

 

[schmalts]

That orange one is gorgeous. You ever make and sell those?

I just sell the wood. Tops and body blanks. Going to make a couple stratocasters next

 

[ignorethefringes]

I just sell the wood. Tops and body blanks. Going to make a couple stratocasters next

Very cool. A pretty tele style electric guitar is on my bucket list for sure

 

[TheBenHoyle]

Now that turkey season is over for me, I am back in the woodshop moving projects along. Just finished a Mother's Day gift for my wife. She said she wanted a lazy Susan for the dining room table so I got a log section from a Hackberry tree that fell down on my friend's farm and went to work.









I really love the spalting and the all the figuring in the wood. And the wife loves it too.

 

[TheBenHoyle]

I got a turkey this year. It was six long years since my last one and I figured that was a special enough occasion to warrant making a tail fan display.



The feather attached on the side and wood-burnt on the center was something I found when I sat down under the cottonwood tree to set up for the turkeys to arrive. I like to think it was my lucky feather so I stuck it in my cap for the hunt and gave it a place of honor on the display.



This is a little closer look at the detail. I use an embedded magnet to hold the shell in place. I don't have a picture (happy to post one if any one wants it) but I did the same thing with two magnets, one in the board and one in the fan) to hold the fan in place.

The cherry wood is from the tail end of a piece of a branch that tore off a tree not far from where I shot the turkey. I use the other part of the branch to make a mount for my 2020 Euro mount buck, which I think I posted pictures of in this thread.



I love taking found wood and turning it into something pretty.



And of course, here's a gratuitous picture of me with the turkey.

 

[Dsnow9]

Now that turkey season is over for me, I am back in the woodshop moving projects along. Just finished a Mother's Day gift for my wife. She said she wanted a lazy Susan for the dining room table so I got a log section from a Hackberry tree that fell down on my friend's farm and went to work.

View attachment 275451



View attachment 275452
View attachment 275453
View attachment 275455

I really love the spalting and the all the figuring in the wood. And the wife loves it too.

Did you make or purchase the metal router tray?

 

[TheBenHoyle]

Did you make or purchase the metal router tray?

I made it. The ends are short sections of 4x4 and the rails are 1/2" or 3/4" aluminum L-shaped bar. cheap, easy and it works really well. I made a longer one for use on wider pieces too.

 

[Dsnow9]

I made it. The ends are short sections of 4x4 and the rails are 1/2" or 3/4" aluminum L-shaped bar. cheap, easy and it works really well. I made a longer one for use on wider pieces too.

That’s what I was hoping to hear. I get logs all the time but the rack to purchase are insanely expensive and overkill.

 

[TheBenHoyle]

That’s what I was hoping to hear. I get logs all the time but the rack to purchase are insanely expensive and overkill.

In the picture you can see the router sled is riding on some 1x4 stock. That are just pallet slats that I repurposed. Two 1x4s screwed together at a right angle. It's a pretty low cost way to go.

 

[Kaitum]

I've had a bunch of wine barrel staves laying around for too long. This project used up a few. The red color is staining from the wine.

 

[Goodfish]

I've had a bunch of wine barrel staves laying around for too long. This project used up a few. The red color is staining from the wine.
View attachment 278225View attachment 278226

Nicely done to leave that stave detailing! Straight forward and yet elegant. Well thought out!

 

[Kaitum]

This put a good dent in the barrel stave pile.