What are you currently reloading?

[dcreiss]

I’ve been shooting the 125 HHT for the last two years. If my experience counts for anything, they’ll work just fine on elk to.

I have assumed as much but have lighter rifles in large calibers that give me mental comfort of larger frontal diameter and magnum speeds.

 

[accubond]

Ya, like a shotgun’s pattern at 100.

Gotcha, I'm a little slow sometimes.

 

[noharleyyet]

View attachment 359468100 rounds of 22CM, 90gr Atips this morning..

3200'ish MV? Suppressed?

...sounds like much fun.

 

[peterk1234]

Did some poor man annealing of 308 brass. Testing a batch to see if I get longer brass life.

Drill, torch and count to six Mississippi.

 

[psinclair]

3200'ish MV? Suppressed?

...sounds like much fun.

I'M getting 3150 with my 17" 1-7 barrels, and 3350 with my heavy barreled 22 CM with the same load. The G7 BC went from .307, up to .328 for the 3350 velo.

I'm using R26.....rare pixey dust.. Easy bolt lift, and primer pockets are staying tight. I anneal every firing with an AMP annealer.

 

[psinclair]

I'M getting 3150 with my 17" 1-7 barrels, and 3350 with my heavy barreled 22 CM with the same load. The G7 BC went from .307, up to .328 for the 3350 velo.

I'm using R26.....rare pixey dust.. Easy bolt lift, and primer pockets are staying tight. I anneal every firing with an AMP annealer.

 

[Dan-06]

Let me look once, I might have some rl26 that I don’t need.

 

[grizzly63]

Currently loading 25-06 REM, 300 WSM and 38-55 WIN.

 

[tkhuntsman]

I getting ready to start load development for a custom 250 savage on a shortened Mauser action. It has a 1-9 twist so I'm thinking to start with a 110 grn eldx and RL 15.5. just see where it goes from there

 

[300wsmreloader]

Have been considering the TTSX and Accubond for my 6.5, as well. Have you calculated how far out you are maintaining enough velocity for them to open?

I use 165 ttsx in my .308 for years & they perform well on whitetail.

 

[300wsmreloader]

Currently loading 25-06 REM, 300 WSM and 38-55 WIN.

What are you using for your 300wsm? I’m new to reloading and would appreciate some input. I’m shooting a Tikka3.

 

[grizzly63]

What are you using for your 300wsm? I’m new to reloading and would appreciate some input. I’m shooting a Tikka3.

Staball 6.5 and 178 gr eldm. Just been using some brass I picked up at the gun show. Expensive. I have 40 once fired Noslers on the way. I will try some 165 gr bullets next. From everything I read, they shine with 150-180 bullets. The rifle I have is a custom. Savage or Steven action, 26' stainless barrel. Has a lot of freebore. Even though its a long action, the mag length limits bullet seating. Currently jumping around .130 I do not want to use it as a single shot. I may look into changing that. It is accurate the way it is but sometimes its just hard to leave things as they are. It has a cheap savage stock on it. No detachable mag. Even though its a Savage, it has no barrel nut. Better quality barrel lug though.