What are you currently reloading?

[dcreiss]

I’ve been shooting the 125 HHT for the last two years. If my experience counts for anything, they’ll work just fine on elk to.

I have assumed as much but have lighter rifles in large calibers that give me mental comfort of larger frontal diameter and magnum speeds.

 

[accubond]

Ya, like a shotgun’s pattern at 100.

Gotcha, I'm a little slow sometimes.

 

[noharleyyet]

View attachment 359468100 rounds of 22CM, 90gr Atips this morning..

3200'ish MV? Suppressed?

...sounds like much fun.

 

[peterk1234]

Did some poor man annealing of 308 brass. Testing a batch to see if I get longer brass life.

Drill, torch and count to six Mississippi.

 

[psinclair]

3200'ish MV? Suppressed?

...sounds like much fun.

I'M getting 3150 with my 17" 1-7 barrels, and 3350 with my heavy barreled 22 CM with the same load. The G7 BC went from .307, up to .328 for the 3350 velo.

I'm using R26.....rare pixey dust.. Easy bolt lift, and primer pockets are staying tight. I anneal every firing with an AMP annealer.

 

[psinclair]

I'M getting 3150 with my 17" 1-7 barrels, and 3350 with my heavy barreled 22 CM with the same load. The G7 BC went from .307, up to .328 for the 3350 velo.

I'm using R26.....rare pixey dust.. Easy bolt lift, and primer pockets are staying tight. I anneal every firing with an AMP annealer.

 

[Dan-06]

Let me look once, I might have some rl26 that I don’t need.

 

[grizzly63]

Currently loading 25-06 REM, 300 WSM and 38-55 WIN.

 

[tkhuntsman]

I getting ready to start load development for a custom 250 savage on a shortened Mauser action. It has a 1-9 twist so I'm thinking to start with a 110 grn eldx and RL 15.5. just see where it goes from there