New Remingtons

[pawhitetail]

Has anyone here actually bought one of the new Remingtons yet? If so, what's your first impression? Accuracy and function good?
I have a couple pre bankruptcy 700bdls and would really like to get either the 270 or 308 in a bdl but hesitant without some input. I know some local shops are getting some in and they're gone like hotcakes but I haven't heard anything on them yet

 

[elevatorman]

I need to go buy a pump action 7mm mag before they go out of business again...

I bought a 700 cdl right before they went out of business and it's a great gun. Only issue was the quality control was a little loose, the chamber was a little rough and dirty. Polished up fine though. I'm Interested to see if their quality has improved or gotten worse nowadays.

 

[Mallardsx2]

They make a 760 in 300wsm with a threaded barrel and I’ll buy 2 of them…tomorrow.

 

[jt13]

They make a 760 in 300wsm with a threaded barrel and I’ll buy 2 of them…tomorrow.

Make em carbine length and I'm in

 

[Watts307]

Has anyone here actually bought one of the new Remingtons yet? If so, what's your first impression? Accuracy and function good?
I have a couple pre bankruptcy 700bdls and would really like to get either the 270 or 308 in a bdl but hesitant without some input. I know some local shops are getting some in and they're gone like hotcakes but I haven't heard anything on them yet

Not yet, we got a few in our shop. Seem nice, my coworker who has forgotten more about guns then I will ever know, didn't seem to hesitate buying one in 300WM.

 

[mtmuley]

Not yet, we got a few in our shop. Seem nice, my coworker who has forgotten more about guns then I will ever know, didn't seem to hesitate buying one in 300WM.

The Alpha 1 or a 700? mtmuley

 

[TN2shot07]

I keep hoping to come across one of the alpha’s, nothing yet tho. The fit and finish on the regular 700s has looked good so far

 

[Cogreeny]

I bought a new one 700 adl in .223 it came with a 1-8” twist which I was pleasantly surprised with. It shoots 69 grain bthp’s very well. Haven’t tried anything else in it yet. I’m very happy with it.

 

[Watts307]

The Alpha 1 or a 700? mtmuley

I dont know anymore...there's too many damn guns out nowadays.

 

[Cogreeny]

The Alpha 1 or a 700? mtmuley

I’d be interested in what guys say about the alpha 1. Have you saw or handled one yet? I think they’re pretty damn expensive.

 

[RealMuddyboots]

I have been talking to a distributor and he didn't think he will see an Alpha1 until mid summer at earliest.

 

[noharleyyet]

First Look: Remington Alpha 1 New Model 700 From Remington

The Remington Alpha 1 is the next evolution of the 700 series of rifles from Remington Firearms. After a few years of restructuring, Remington is returning to their roots, producing firearms that not only perform but ones that have the highest levels of quality control aimed at the hunting market.

internationalsportsman.com

 

[nhenry]

New Production Remington 700 CDL

After doing a good bit of research on the new Remington QC improvements, and being very impressed with what they are doing. I ordered a new production 700 CDL in 7mm Rem Mag. I should have it in my hands this weekend. It has a 26” barrel with 1:8 5r hammer forged barrel that’s stress relieved...

forum.nosler.com

Skip to post 22 and 46. Of course, this was one rifle. Take it as you will

 

[noharleyyet]

New Production Remington 700 CDL

After doing a good bit of research on the new Remington QC improvements, and being very impressed with what they are doing. I ordered a new production 700 CDL in 7mm Rem Mag. I should have it in my hands this weekend. It has a 26” barrel with 1:8 5r hammer forged barrel that’s stress relieved...

forum.nosler.com

Skip to post 22 and 46. Of course, this was one rifle. Take it as you will

Good read.

 

[Addicting]

New Production Remington 700 CDL

After doing a good bit of research on the new Remington QC improvements, and being very impressed with what they are doing. I ordered a new production 700 CDL in 7mm Rem Mag. I should have it in my hands this weekend. It has a 26” barrel with 1:8 5r hammer forged barrel that’s stress relieved...

forum.nosler.com

Skip to post 22 and 46. Of course, this was one rifle. Take it as you will

@p_ham that will make the market hard if they start producing the mountain rifle again. For 930 that rifle is a great deal with that quality.

 

[mtmuley]

@p_ham that will make the market hard if they start producing the mountain rifle again. For 930 that rifle is a great deal with that quality.

I've seen comments that the Alpha 1 needs to come in under 1K to be competitive. Doesn't make sense with the features on the rifle. Glad to see some reviews on the 700's coming out. mtmuley

 

[brockel]

Would be nice to see some quality Remington rifles back on the market. Not a chance am I going to pay what people want for a used Remington anymore.

 

[p_ham]

@p_ham that will make the market hard if they start producing the mountain rifle again. For 930 that rifle is a great deal with that quality.

Lol- I'm not exactly mass producing...

 

[nhenry]

I've seen comments that the Alpha 1 needs to come in under 1K to be competitive. Doesn't make sense with the features on the rifle. Glad to see some reviews on the 700's coming out. mtmuley

I feel like that’s just regurgitated nonsense from how people felt about the old remington. I’d happily choose an Alpha 1 over a Christensen any day with all the good reviews I’ve seen on it so far

 

[brockel]

I feel like that’s just regurgitated nonsense from how people felt about the old remington. I’d happily choose an Alpha 1 over a Christensen any day with all the good reviews I’ve seen on it so far

Too bad the alpha doesn’t come in stainless. The $1800 price tag I’ve seems a little high. I think they could sell them for $1400. I can put the same rifle together for right around $1600 except it would be stainless.