Yeti GOBOX Collection

Anyone loading their .300 WSM down to '06 or .308 levels?

Honestly just look at the min starting loads.
A 150 gr bullet and 54gr of h4895 or 64 gr of ramshot hunter should get you right around 2900fps and be a real killer with manbun type recoil.
 
Honestly just look at the min starting loads.
A 150 gr bullet and 54gr of h4895 or 64 gr of ramshot hunter should get you right around 2900fps and be a real killer with manbun type recoil.
I've done that, but was hoping to learn from those who have experimented in the real world.
 
60% rule with 4895
Have you done this? I've done it with a .308 so my wife would shoot it, but I don't have 4895 on hand and don't particularly want to add yet another powder to my bench. I don't think 4895 is the only powder that is safe to load below book starting loads though. I've read you can safely do this with a number of powders, so I'm kind of wondering if that includes one of the ones I already have.
 
Do you care to elaborate? What bullet weights/velocities did you get from your .300 WSM at 60%? I'd like to hear some real world results before I run out and buy another powder.
I used it in a 30-06 at the 60% rule for starting charge. I didn’t chrono any of the loads. I was using a 130 grain TSX. My daughter killed several deer with it.
 
Why on gods green earth would you buy a rifle in one caliber and then load it to a different caliber level? I would recommend re-evaluating your selection criteria. ;)
 
I used it in a 30-06 at the 60% rule for starting charge. I didn’t chrono any of the loads. I was using a 130 grain TSX. My daughter killed several deer with it.
Nice. I've read nothing but good things about that 130 TSX/TTSX. Might have to give it a go in that one and my .308.
 

Latest posts

Forum statistics

Threads
114,308
Messages
2,052,217
Members
36,546
Latest member
Bdog
Back
Top