308 Moses

[kodiakisland]

When I lift the bolt with ease, literally pull it back brass pops out inspect it, primer cup is still round, no crater that is telling me what I’m wanting to know.
With the bigger magnum cartridges I have noticed the base junction show’s you pressure if it’s there really fast! I have been shooting the 300 Norma mag before going Moses. I was maxed out at 88gr of n570 with a 215 @3160fps, I could have dropped the load down but the node was there so I took advantage of it as most do.

case volume is consistent due to quality brass. I mean I’m not going to sit down and fill 100 cases with h20 and check the difference I do 20 and that will gives me enough info that I’m looking for, It shows aswell when the sd and es is numbers lots of guys are looking for.
Sorry about my crappy wording hahaha apologies

Yeah, it tells you that you are still somewhere south of 100K. Good brass in a good rifle won't show any indication whatsoever at 70K. Pressure testing doesn't guess or read tea leaves.
If your goal is 70K, then I guess that's fine. One reason I don't shoot other people reloads.

 

[Potsie]

I’m curious how they handle mono’s?

 

[Dfoster]

Yeah, it tells you that you are still somewhere south of 100K. Good brass in a good rifle won't show any indication whatsoever at 70K. Pressure testing doesn't guess or read tea leaves.
If your goal is 70K, then I guess that's fine. One reason I don't shoot other

I’m curious how they handle mono’s?

 

[dsrtibb]

I’m curious how they handle mono’s?

I tested a few different badlands bullet before George the owner passed and they ran amazing. I currently run cutting edge in my 33 Moses and they shoot amazing. I'm also getting some hammer bullets for testing.