Redmt
Well-known member
I'm jealous! I wish I had the flat ground that I could commit to my mill permanently. It's a pain to drag it out and set it up whenever I have a project.
Woodworking Hunt Talkers?
- Thread starter hansontyrel
- Start date
LuketheDog
Well-known member
@Dsnow9 was generous with a big maple round that had some cool burled edges, so I made a coffee table...
Redmt
Well-known member
I'm guessing you used a router sled for the surface . What bit or shaper cutter are you using?
LuketheDog
Well-known member
It's an Amana Tool 2" surfacing bit
np307
Well-known member
Not quite fine woodworking but I've been doing some work with wood on my days off. Set posts last week, braces and pickets going on today. Don't worry though, there'll still be something for the metalworking thread. 
Redmt
Well-known member
I
I have a Chinese 2-1/2" 3 bit carbide. It works ok but always looking for something "better".
LuketheDog
Well-known member
Redmt
Well-known member
Mine is 3 flute and nowhere near that quality. I had a 4 flute but they were terribly uneven. It left a horrible finish. I'm working on converting an old optical torch table for the router. It's wicked smooth and 5'x5'.
LuketheDog
Well-known member
I need to build a proper sled, mine works fine if I take the time to monkey with making sure everything is level on the front end. I have two heavy 1/4" aluminum Z-bars from the back of a highway sign that I use for the side rails, they work great but my sled needs an upgrade, if I do this more I'll build a bigger metal one.
Redmt
Well-known member
This is maybe 7 out of 10. It works but pretty limited to width. Like you I'm using a couple aluminum pieces of 3" channel for rails. Setup isn't to bad but I want to go about 42" wide for dining table slabs.
np307
Well-known member
And the "finished" (still have to trim the tops of the 4x4s obviously and I'm still deciding on whether or not I want to paint it white) product:
TheBenHoyle
Well-known member
I hate to throw away scraps of wood, but I make way too many of them. I had to purge a bit when I started working on cleaning out the garage. But I got a little bit of a pay off when I recently came up with an idea for a couple of hat hangers.
Out to the scarps I go, pick out a scrap of 1x12 pine and mark up some shapes to cut out and sand.
Using dowels and glue for connections and tung oil for finish, I had these on the wall the next day.
The hat on the right was my Father in Law's. We use it for when the kids make a snowman. The one on the left is my grass hat I wear when I am cutting the lawn.
One less scrap of wood on the shelf.
Out to the scarps I go, pick out a scrap of 1x12 pine and mark up some shapes to cut out and sand.
Using dowels and glue for connections and tung oil for finish, I had these on the wall the next day.
The hat on the right was my Father in Law's. We use it for when the kids make a snowman. The one on the left is my grass hat I wear when I am cutting the lawn.
One less scrap of wood on the shelf.
OntarioHunter
Well-known member
- Joined
- Sep 11, 2020
- Messages
- 5,992
I figured the grass hat was for doobies.
mdunc8
Well-known member
Name the river and it’s yours!
Gerald Martin
Well-known member
- Joined
- Jul 3, 2009
- Messages
- 8,694
Name the river and it’s yours!View attachment 334282
[/QUOTE
Do locals get to guess?. Beautiful agate on that box!
mdunc8
Well-known member
Finished another batch. If you look closely at the second picture, you’ll see a tag and fly from a fish the gentleman’s mom caught on a visit out here this spring.
Redmt
Well-known member
That's beautiful. How did you finish it?
Similar threads
