Mustangs Rule
Well-known member
- Joined
- Feb 4, 2021
- Messages
- 699
Was the receiver engraving on the old 2 3/4 inch Ithaca Model 37 Shotguns hand done?
Vintage Ithaca Model 37 Shotguns Engraving
- Thread starter Mustangs Rule
- Start date
jpcoll01
Well-known member
- Joined
- Jan 14, 2021
- Messages
- 501
Not sure if this is vintage enough to be what you were looking for but I’d say yes they look hand engraved to me. I love this gun, my Dad gave to me many years ago and I just love to shoot it.Mustangs Rule
Well-known member
- Joined
- Feb 4, 2021
- Messages
- 699
Great shotgun, I cannot see the brand? Love to see a full photo
Thanh you
Thanh you
jpcoll01
Well-known member
- Joined
- Jan 14, 2021
- Messages
- 501
It’s an Ithica over and Under. Will try to grab a full photo later
elkduds
Well-known member
My 1st gun was an Ithaca m 37. Pump action, bottom eject and load. This O/U should be a different model #. Nice.
joelweb
Well-known member
No idea, but I'm a fan of those shotguns.
Nicoli7153
Well-known member
- Joined
- Sep 9, 2021
- Messages
- 518
Yes I thought the 37 was a pump, had one for work back in the day
ImBillT
Well-known member
- Joined
- Oct 29, 2018
- Messages
- 3,896
The Ithaca 37 that I had did not appear to be hand engraved. That’s just my guess.
It was a much slicker, more precision, better made, and better designed(thank you Mr Browning) shotgun than my 870. That said, it had one problem, and I’ve heard of it being an issue on the BPS as well. The shell stop does not move very far. With domestic shells(flat rim) it worked perfectly. With foreign shells(rounded rim) it would spit an extra out on the ground. I tweaked it to work perfectly with foreign shells BUT THEN, it would not release domestic shells. I tweaked it back. Now it would not work with foreign shells. I bought a new shell stop. Same problem. Eventually I realized that I could tweak it to work with the foreign shells and then grind the center of the shell stop back, and it allowed both foreign and domestic shells to work properly. Unfortunately it was still a fixed full that shot some loads extremely well, but others somewhat poorly, and it beat the snot out of me. My 3.5” 870 feels like it kicks less with 2.25oz than the 2 3/4” Ithaca 37 did with 1.5oz. It also did not fit me well, and if I wasn’t practiced up I couldn’t hit anything with it. My 870 fits me better and it shoot where I look even when I’m rusty.
It was a much slicker, more precision, better made, and better designed(thank you Mr Browning) shotgun than my 870. That said, it had one problem, and I’ve heard of it being an issue on the BPS as well. The shell stop does not move very far. With domestic shells(flat rim) it worked perfectly. With foreign shells(rounded rim) it would spit an extra out on the ground. I tweaked it to work perfectly with foreign shells BUT THEN, it would not release domestic shells. I tweaked it back. Now it would not work with foreign shells. I bought a new shell stop. Same problem. Eventually I realized that I could tweak it to work with the foreign shells and then grind the center of the shell stop back, and it allowed both foreign and domestic shells to work properly. Unfortunately it was still a fixed full that shot some loads extremely well, but others somewhat poorly, and it beat the snot out of me. My 3.5” 870 feels like it kicks less with 2.25oz than the 2 3/4” Ithaca 37 did with 1.5oz. It also did not fit me well, and if I wasn’t practiced up I couldn’t hit anything with it. My 870 fits me better and it shoot where I look even when I’m rusty.
Last edited:
