Trade or sell Components.

[BackofBeyond]

Can you sell the components already put together? Asking for a friend.

In general or specifically on the forum?

 

[CowboyLeroy]

Like could somebody make up a load and sell them on the forum

 

[BackofBeyond]

Like could somebody make up a load and sell them on the forum

Try it.

What’s the worst that could happen, they take your birthday away?

 

[Addicting]

Like could somebody make up a load and sell them on the forum

Yes

 

[CowboyLeroy]

Yes

Thank you for the help

 

[Redmt]

I went shooting today with the 6.5 x 300 and the 308 winnie and the 35 remington. It was a little cold but not bad at 12F'. At any rate i shot two pretty good groups for me with some Barnes 127 LRX so I have decided to settle with that for a hunting round. Did not fair so well with the 308 or 35. I would like to trade bullets for something different. Here is what I have:

130- 6.5 Horn ELDM 140 gr
30-6.5 Horn ELDM 147 gr
55-6.5 Horn ELDM 130 gr
150-6.5 Speer 140 SP
35-6.5 Nos 140 partition
45-6.5 Horn 129 interlock sp
70-6.5 Horn 140 sp

115-308 Nos ETIP 100 gr
40-308 Hammer 100 gr
40-358 hammer 140 gr
100-358 Horn 250 gr RN
18-358 Speer 250 gr HCSP

Interested in 257 -115 VLD, any 30/30 bullets, Variety of 308 bullets,264-127 Barnes LRX, 358-Speer 180 FP, all offers considered.

If anyone offers you too many .264 LRX keep me in mind please,,,,,,

 

[44hunter45]

Like could somebody make up a load and sell them on the forum

I used to sell a lot on GunBroker. Person to person ammo sales are legal unless the buyer is in a prohibited state. I.E. California.

Technically any live ammo, primers, or primed brass have to be shipped UPS with the proper labels applied. They cannot be sent US Mail.

 

[grizzly63]

If anyone offers you too many .264 LRX keep me in mind please,,,,,,

Powder Valley available

 

[Arcola]

Anyone got any extra factory loaded Nosler .28 160 Accubonds ( not ABLR) wanting to trade for different ammo. I tons of other ammo for trade. I doubt you do but throwing it out there.

I have one box. Only thing I'm really in need of right now is 150 E-tips in 28 or ADG brass in 28.

 

[Pucky Freak]

Looking for a box or partial box of hard cast .357 Rem mag rounds. 2 online manufacturers have them in stock, but with shipping and tax is around $80 for qty 20. I can’t find any place in central IA that carries any, let alone has much of any .357 ammo in stock.

 

[Redmt]

Looking for a box or partial box of hard cast .357 Rem mag rounds. 2 online manufacturers have them in stock, but with shipping and tax is around $80 for qty 20. I can’t find any place in central IA that carries any, let alone has much of any .357 ammo in stock.

I think these would clean up if I ran them through the vibrator w/walnut shells. I'm pretty sure I have some more somewhere.

 

[belshawelk]

I have one box. Only thing I'm really in need of right now is 150 E-tips in 28 or ADG brass in 28.

I have Nosler once fired brass for .28. I don’t reload so that’s the only components I have.

 

[Redmt]

I think these would clean up if I ran them through the vibrator w/walnut shells. I'm pretty sure I have some more somewhere.View attachment 212297View attachment 212298

It looks like I misread his request
Loaded ammo not bullets,,, I have some loaded but I'm in the people's republic of California. I guess if they were packed correctly it's ok?

 

[MThunter398]

IMR 4831 is available on Brownells as of 7:00 pm tonight

 

[nhenry]

IMR 4831 is available on Brownells as of 7:00 pm tonight

It's available at my Local ACE hardware in big quantities. Oh -- and primers too.

 

[Redmt]

My Ace hardware doesn't have electrical tape,,,,,

 

[zach_destroys]

Looking for 30-06 brass, preferably once fired matching headstamp and 180gr 30 cal accubonds.
I have 93x 181gr Hammer Hunters to trade

 

[OntarioHunter]

I may be shopping here in the future. Our only components store between Sudbury and Winnipeg just closed its doors.

 

[T Bone]

Anybody looking for 6mm Remington/.244 Remington? I bought a bucket of mixed brass and found a bunch of 6mm Rem/.244 Rem near the bottom of the bucket.

Shoot me a PM if you're looking.

 

[Addicting]

Looking for 30-06 brass, preferably once fired matching headstamp and 180gr 30 cal accubonds.
I have 93x 181gr Hammer Hunters to trade

@Durango Mike
@ccc23454

Good luck on the accubonds. They seem to be unobtainable lately.