Going to see a bobbed mashburn soon. Heard it here first.
Time on my hands, time for a project!!!
- Thread starter SFC B
- Start date
kiwi hunter
Well-known member
- Joined
- Jul 21, 2013
- Messages
- 1,187
I'd kill wapiti with that, haha
Benfromalbuquerque
Well-known member
- Joined
- Jul 15, 2020
- Messages
- 1,621
But wait, I’d reckon you already have a DPMS Gen 1-type lower. Bear Creek has 22-250 with side charging too for couple hundred.I have decided that what I really NEED is a coyote gunI want to put one together myself for a reasonable $$$$ so I am now in search of an action. I have narrowed it down to 2 choices in 22-250 .... 1) a Tikka T3X or a 2) Ruger American Predator . If any of you have one or know of one please let me know.
Shoot, I’d kill a lot with that
BackofBeyond
Well-known member
That would be bad ass.
No. No it wouldn't. mtmuley
D4570
Well-known member
I have a load that pushes an 80gr hammer at 3800 fps and yes I can use it for elk, and have.
https://hammerbullets.com/product/243-80gr-hammer-hunter/
BAKPAKR
Well-known member
I think Tikka has the 22-250 available in both 1:14 and 1:8 twist. I would definitely get the 1:8 so I could shoot heavier bullets.
MT_Chad
Well-known member
I'm just shy of 3500 fps with the 88 hammer in my 6mm AI.
Sorry, off track from the OP.
For a coyote gun that is going in a chassis, I would probably do the American. I prefer tikkas, but are probably cost prohibitive in this situation. If just buying a complete gun I'd go tikka.
Wind Gypsy
Well-known member
- Joined
- Mar 12, 2017
- Messages
- 2,057
Agree with @brockel's input. Only way you find a tikka action to use as a base that is much better than buying a new rifle is if you come across someone who doesn't know what the market rate is for their tikka action. Especially if you get a discount, you can probably get a whole rifle for market rate for action.
I did a 6 creedmoor tikka this spring. There are new stainless 6.5 creed tikkas available online for $725 and that is what I used as the basis for the build. Had it shipped to a smith to pull the new factory barrel and put a 6 creed tube on it and threw it all in a bravo chassis.
I'm sure the rugers work fine but after a guy has "nice" rifles it can be hard to be satisfied with the rougher/cheaper ones.
Edit to add: there's always a chance you could come across someone organically who bought a tikka for $450 15 years ago that they dont use and would be happy to offload it for what they paid or less. Its probably easier for someone in your job to come across such a person. But anyone who thinks to sell one online and looks up what the going prices are will probably ask $600ish or more.
Last edited:
If only they’d get with the times and move their 7s and all 30s to proper twists. 1-9 minimum (preferably 1-8) for the 7s and 1-10 minimum for 30s
They have finally started their 300 win mag to 10” but the mag is to short to take advantage of it anyways
HSi-ESi
Well-known member
Ha - I bought a Tikka when they first hit the US. I can't remember the exact price - but it was less than 400. 330 if memory serves. It has piled up a ton of critters in the last 20 years. Not for sale though
Wind Gypsy
Well-known member
- Joined
- Mar 12, 2017
- Messages
- 2,057
Ha - I bought a Tikka when they first hit the US. I can't remember the exact price - but it was less than 400. 330 if memory serves. It has piled up a ton of critters in the last 20 years. Not for sale though
I well remember buying a m700 ADL in 2005 over a tikka that was in that same $3XX range because "'merica > euro plastic". I should sell that m700 but its just not worth much so haven't taken the time! I'd still be using the tikka action today if I had made that choice.
I picked up a Tikka and checked it out 20 some years ago. Put the plastic thing right back. Never got over the cheap feel. How much for the ADL? mtmuley
Wind Gypsy
Well-known member
- Joined
- Mar 12, 2017
- Messages
- 2,057
With the 3-9 nikon prostaff included, $300+ shipping seems reasonable? It's a .270. wild guess of about 200 rounds down the tube. Had a gunsmith do a little work on the factory trigger is all that's been done.
I was kidding. Don't really need it. Bare actions are more than $300 I think. Great deal. mtmuley
pilsner
Active member
I've got a RA Predator in a Magpul stock chambered in 6mm Creedmor.
It's a new rifle to me but so far it's a shooter with Hornady match ammo.
For the money I'd buy another one.
It's a new rifle to me but so far it's a shooter with Hornady match ammo.
For the money I'd buy another one.
