I just ordered a Browning X Bolt, and I am considering the Talley Integrated aluminum rings/bases for it. Anyone have any experience with these, are they good quality? I usually get the Leupold steel dual dovetail rings and bases for my rifles. I will be mounting a Leupold VX-R 3-9x 50mm with a 30mm tube...always with Butler Creek flip open scope covers. Talley lists the 740735 medium height for scopes up to 50mm, and the 750735 high for scopes up tp 56mm. Any advice on which ones to get? Thanks in advance.
Talley One Piece Aluminum Rings/Bases
- Thread starter ludville1
- Start date
MThuntr
Well-known member
Talley is basically all I use...everything from 223 to 300WinMag. No issues.
Elkmagnet
Well-known member
Talley ultralight integrated and the leupold integrated have both been excellent so far.
Doublecluck
Well-known member
Use them on several lightweight hunting rigs amd they are great.
buffybr
Well-known member
I use them on all of my rifles from .223 to .375 RUM. No issues.
cahunter805
Well-known member
- Joined
- May 27, 2014
- Messages
- 2,545
Be sure to check the base screws for length and fit. X bolt scope base screws are known to strip easily.
oswald2581
Active member
I run them on my X-bolt and have had zero issues. I gave them a try because i was interested in the one piece design and all the reviews I read were positive. I have a hells canyon and could match the cerakote color also.
Dougfirtree
Well-known member
Love them. I don't think you can do much better for a lighter hunting rifle.
cahunter805
Well-known member
- Joined
- May 27, 2014
- Messages
- 2,545
Hawkins precision long range Hybrid rings blow Talleys away. They just don’t make them for all rifles yet.
Dougfirtree
Well-known member
Hadn't heard of them and I'm sure they're great. I notice they don't list the weight, though...
cahunter805
Well-known member
- Joined
- May 27, 2014
- Messages
- 2,545
3-4oz for the pair.
BigMonk96
Member
I'm a big fan of the DNZ Game Reaper mounts -- have them on all my rifles and have never had an issue**
www.dnzproducts.com
Browning A Bolt Scope Mounts And Rings | Game Reaper Browning A Bolt
Browning A Bolt Scope Mounts & Rings - DNZ Products Game Reaper one-piece Browning scope mount is lightweight, durable, and extremely accurate. Place your order right now!
www.dnzproducts.com
ShadowValley
Member
- Joined
- Oct 2, 2020
- Messages
- 65
Have them on my weatherby vanguard and love them. Scope fit really nice and spun freely without any lapping necessary!
Last edited:
Have them on my mz & 30-06.
Zero complaints and great factory service. I had gotten regular med. and needed extended base to get focal zone right on my Zeiss. I called & the guy said they are on their way,just return the others...
I always lap my scope anchors,takes a few minutes.
Zero complaints and great factory service. I had gotten regular med. and needed extended base to get focal zone right on my Zeiss. I called & the guy said they are on their way,just return the others...
I always lap my scope anchors,takes a few minutes.
antelopedundee
Well-known member
If you use a Pic rail it's usually not necessary to lap unless the rings have burrs in the scope tube contact area.
I always lap.
1000% not rude but…..
There no way you can bolt things together and have more than 80% contact right out of the box.
Lapping is cheap insurance for accuracy and not marking up your scope.
Besides, pic rails make it more difficult to load rounds when you have gloves on.
