Sunday Pic of the Day

Ben Lamb said:
I went whole hog & picked up a Brent EX wheel. It's a beast. I am currently set up in the garage, which is nice & heated for the winter but will be building a studio in the pole barn this winter. Our barn has 2 stalls and a tack room which are just being used for storage at the moment, so I'm going to finish those off and have a good sized space and reclaim the garage for other uses. Have enough firebrick to build a small gas-wood hybrid kiln, so that's likely going to be the spring project so I can move back up to cone 10 firing and get away from cone 6. Glaze chemicals for mid-fire have negated any cost savings in terms of firing so I'm going back to reduction with ash, shinos, temmokus & chuns.
Click to expand...

Great! Those Brent's are nice. Is your "hybrid kiln" going to use gas to start the wood, or is the gas to get the kiln to a certain cone where you take over with wood? Yeah, ash glazes and reduction firing is my favorite way to go, but I've never done salt glazes and those have always intrigued me. Course, that opens a whole toxic bag of worms, as well as requiring a dedicated kiln.

What sort of kiln are you going to build - updraft, down draft, catenary, etc?
 
Brad said:
Great! Those Brent's are nice. Is your "hybrid kiln" going to use gas to start the wood, or is the gas to get the kiln to a certain cone where you take over with wood? Yeah, ash glazes and reduction firing is my favorite way to go, but I've never done salt glazes and those have always intrigued me. Course, that opens a whole toxic bag of worms, as well as requiring a dedicated kiln.

What sort of kiln are you going to build - updraft, down draft, catenary, etc?
Click to expand...

Mostly as a gas assist for the wood, but I also wanted to be able to just fire to cone 10 w/gas if wanted. I'd love a dedicated salt kiln, but there's a potter near me that has a couple of soda kilns set up and I've yet to make his acquaintance to get in on his firings, so I think I'll stick with the hybrid gas/wood in a downdraft set up. Likely a sprung arch kiln with a steel frame and sliding door, or I may just go old school and do a catenary arch since it'll be easier and not much welding - I'm still debating that. I took apart a catenary arch kiln last spring and most of the brick was salvageable as were the 4 venturi burners (which just need new bells). Local hardware store is primed to help with the propane set up too. I will need some more brick, and some steel pipe for the burner stack, but the gravel is in for the pad & I should be able to stand up a decent shed quickly.

The old kiln:
1694097636724.png

One of the better pots from the last few firings:

1694097863072.png


My Instagram is pretty much just pots: https://www.instagram.com/benjamindlamb/
 
Ben Lamb said:
Mostly as a gas assist for the wood, but I also wanted to be able to just fire to cone 10 w/gas if wanted. I'd love a dedicated salt kiln, but there's a potter near me that has a couple of soda kilns set up and I've yet to make his acquaintance to get in on his firings, so I think I'll stick with the hybrid gas/wood in a downdraft set up. Likely a sprung arch kiln with a steel frame and sliding door, or I may just go old school and do a catenary arch since it'll be easier and not much welding - I'm still debating that. I took apart a catenary arch kiln last spring and most of the brick was salvageable as were the 4 venturi burners (which just need new bells). Local hardware store is primed to help with the propane set up too. I will need some more brick, and some steel pipe for the burner stack, but the gravel is in for the pad & I should be able to stand up a decent shed quickly.

The old kiln:
View attachment 291234

One of the better pots from the last few firings:

View attachment 291235


My Instagram is pretty much just pots: https://www.instagram.com/benjamindlamb/
Click to expand...
Do you sell your stuff?
 
The first day in the field for us.

Gus's 15th hunting season. He was 14 yr, 2 mo, and 2 days old in this photo (Tuesday).
Ipv4z8s.jpg


We got one chance, and we made the most of it, taking two birds from the flock.
nngT2zg.jpg


Gus is never in a hurry. He enjoys it too much.
CdkrMVk.jpg


My Cashmore Hammer gun. 12b, 2.5" chambers. Kinda plain, but it suits me well, and I shoot it well too. Load was a bit on the heavy side using black and bismuth, but it's what I had on hand.
717qLcJ.jpg


And Gus is ready to tell the world, he is still in the game. Best of all, he passed his annual cardio check-up the next day, and we have a clean bill of health for hunting anything this fall.
bDO05Zg.jpg
 

Attachments

  • 1694132910566.gif
    1694132910566.gif
    43 bytes · Views: 7
She likes to hunt with me, loves watching the dogs work and figured out how to best take advantage of hunting season approaching. Island hopping thru the San Juans for 10 days. I'll go Antelope hunting when we're home.
We hope all y'all have a fantastic season with cherished memories.
Sun rise over Mt.Baker, Washington
 

Attachments

  • IMG_7721.jpeg
    IMG_7721.jpeg
    2 MB · Views: 22
  • IMG_7719.jpeg
    IMG_7719.jpeg
    2.5 MB · Views: 21
  • IMG_7718.jpeg
    IMG_7718.jpeg
    1.2 MB · Views: 21
  • IMG_7713.jpeg
    IMG_7713.jpeg
    1.8 MB · Views: 21
  • IMG_7731.jpeg
    IMG_7731.jpeg
    1.3 MB · Views: 22
  • IMG_7743.jpeg
    IMG_7743.jpeg
    2.1 MB · Views: 13
Last edited:
You must log in or register to reply here.

Similar threads

nontyp
Mother’s Day Gifts?
Replies
10
Views
786
jrabq
jrabq
B
PA Sunday Hunting ban repealed?
2 3
Replies
40
Views
2K
wvhunter304
wvhunter304
S
Hello from WY
Replies
11
Views
335
pabearhunter
P
belshawelk
FNG posts
2
Replies
24
Views
2K
noharleyyet
noharleyyet
belshawelk
FNG Posts
Replies
3
Views
411
Dave N
Dave N

Latest posts

Forum statistics

Threads
113,669
Messages
2,029,047
Members
36,276
Latest member
Eller fam

Share this page

Back
Top