resizing 308 brass to 7mm08

[Rooster52]

Resizing a few 308 Winchester brass to 7mm08. Will have to trim to length when done. Got 1000s of 308 brass ,good place to use it up. Just have to keep them separated from my other 308 ammo but that's not a problem. I black out the head stamp anyway .

 

[sbhooper]

They will probably need trimming, Rooster, and I would turn the necks, also. Turning probably isn't necessary, but that is what I would do just to make sure everything is uniform.

Just check the length with a caliper and it will tell you for sure.

 

[TBass]

Unless your 308 cases are way longer than they should be, I doubt you'll have to trim.

 

[MThuntr]

Don't forget the lube...look online for a recipe of liquid lanolin and 100% alcohol for a cheap spray lube

 

[Rooster52]

Don't forget the lube...look online for a recipe of liquid lanolin and 100% alcohol for a cheap spray lube

Thanks.

 

[Rooster52]

They will probably need trimming, Rooster, and I would turn the necks, also. Turning probably isn't necessary, but that is what I would do just to make sure everything is uniform.

Just check the length with a caliper and it will tell you for sure.

I will trim to length but will check it in the chamber for neck thickness.