NOSLER wants to see your success

[millerkiller77]

My WSM is a custom barreled South Carolina Win 70. The barrel is a 26" 10 twist. I use H4350 with this load in Norma brass and a Fed 210M primer.

I've been very successful with heavy bullets in a 300 WSM.

My brother from another mother!
Custom Win 70 reciever, 26" 9.5 twist Proof barrel, Norma brass, and H4350. I've got 400ish 200gr accubonds I was skeptical to develop a load for because of all the negative results posted by " experts" on various forums

 

[mtmuley]

My brother from another mother!
Custom Win 70 reciever, 26" 9.5 twist Proof barrel, Norma brass, and H4350. I've got 400ish 200gr accubonds I was skeptical to develop a load for because of all the negative results posted by " experts" on various forums

What did those experts say about the 200 grain Accubond? mtmuley

 

[millerkiller77]

What did those experts say about the 200 grain Accubond? mtmuley

Too heavy for a WSM to push at speeds required for expansion past 400 , and/or limited powder capacity is handicapping the 200gr, not enough twist, etc, etc.
WSM is the red headed step child I guess..

I'm hoping this new rifle will shoot 181 Hammers, but I'm keeping my options open

 

[mtmuley]

Too heavy for a WSM to push at speeds required for expansion past 400 , and/or limited powder capacity is handicapping the 200gr, not enough twist, etc, etc.
WSM is the red headed step child I guess..

I'm hoping this new rifle will shoot 181 Hammers, but I'm keeping my options open

Sounds like BS from like you said, experts. Give a look at the Hammer 163 grain HHT. mtmuley

 

[millerkiller77]

Sounds like BS from like you said, experts. Give a look at the Hammer 163 grain HHT. mtmuley

Steve at Hammer pointed me towards the 166 w/ superformance.( I provided him with my available powders on hand,twist,etc) I ordered the181s and the 166s because I'm loading four different rifles in 300wsm...

 

[mtmuley]

Steve at Hammer pointed me towards the 166 w/ superformance.( I provided him with my available powders on hand,twist,etc) I ordered the181s and the 166s because I'm loading four different rifles in 300wsm...

Recently? New bullets have been released. I'll straighten him out for you. mtmuley

 

[millerkiller77]

Recently? New bullets have been released. I'll straighten him out for you. mtmuley

January 2023

 

[mtmuley]

January 2023

The tipped bullets are out. Might be worth a look. Or I would look at the 166. But, if you are comfortable with it, shooters are using light for caliber with great success. mtmuley

 

[golfer]

The tipped bullets are out. Might be worth a look. Or I would look at the 166. But, if you are comfortable with it, shooters are using light for caliber with great success. mtmuley

I saw over at LRH guys were having to install tips after receiving bullets. Are all the new bullets arriving not assembled or only certain caliber? Why not wait a bit longer to release them until they can get a machine to do that? I just can’t justify paying more for a new bullet that doesn’t come assembled.

 

[mtmuley]

I saw over at LRH guys were having to install tips after receiving bullets. Are all the new bullets arriving not assembled or only certain caliber? Why not wait a bit longer to release them until they can get a machine to do that? I just can’t justify paying more for a new bullet that doesn’t come assembled.

Then don't buy them. mtmuley

 

[Chaza402]

Aight, I won a beautiful browning xbolt a few yrs ago from gohunt and I chose the 28 Nosler. Quite a round and quite a gun. I’m more of an archery hunter but I have been fortunate enough to take a couple of cows and a great lope buck.
I shot the first cow with a Nosler trophy grade 175 and it was quite an angled away shot. Cow ram about 30 yds and bedded, she promptly expired and upon a good search for the bullet there’s was nothing left of her heart and lower lungs.
Definitely digging this round and this gun.

 

[Boarmaster]

Is that where forest gump lives?

Nope. Forest is from Greenbow.

 

[ThunderNocked]

My Alaska Range Dall Sheep Ram was taken with Nosler 140 Grain AccuBonds out of a 280 Ackley Improved at 290 yards shooting uphill at the same angle as the slope behind me. Snuck up the alders and willows and crawled up the rocks to verify he was legal and laid out and got him.

 

[Jbotto]

Another whitetail doe claimed by 150gr SPS Blem E-tips in my .30-06. 120 yards and she went straight down. Head stayed up and bobbed for about 10 seconds and then she was still.


Entrance side, basically can’t see it.

Exit side, only a rib hit and really no meat lost. Heart was totally intact but lungs were shredded.

 

[GeneralLefty]

All Nosler 55 gr 22-250 BT

 

[DRS]

Nosler Trophy Grade 180 Accubond in 300 H&H

 

[ccc23454]

So anyone that has elk hunted with me knows my policy of shooting elk in favorable places to take care of them, and am quick to tell someone to "hit him again". This year it happened to me, shot this bull first shot he didn't even flinch second I know it hit solid but he keep looking around so after third he turned and forth dropped him. All 4 impacts were solid sounding at 400 yards with 200 gr accubonds going 3150fps. 3 lungs (1 little back but was bubbling) 4th was heart and that was only shot not recovered. These 3 were all offside hide. I have always swore that these 30 cal 200gr accubonds are the best all-around hunting bullet ever made.

 

[Jbotto]

With every animal I’ve shot with this bullet I’ve become a bigger and bigger fan. 150gr blems (ShooterProShop) .308” E-tips from a .30-06. 250ish yards. Bullet entered broadside on left side. Buck staggered spinning around 180°, by the time he was broadside facing the opposite way, I could already see the exit. Staggered a few more steps downhill and slid another few yards. His head stayed up for about 5 seconds where he stopped and then was done. Shot was a bit back from where I wanted but hit both lungs. This is the 6th animal I have taken with this combination and hope to keep shooting them.

 

[EastTNHunter]

6.5G, 125 NPTs, Tac powder, *- brass, CCI 450, loaded and fired by my 9yo son.