No the win mag was threaded 1/2x28 for the brake that came with it. Didn’t trust 1/2x28 with an adapter for suppressor. To thin for me. Was planning to cut back to 20” and do 9/16 but never did it. A suppressor was one of the better firearm investments I’ve made. It’s really good if you have new shooters. I’m about to start the process for another one
Nosler Suppressors
- Thread starter mxracer317
- Start date
No the win mag was threaded 1/2x28 for the brake that came with it. Didn’t trust 1/2x28 with an adapter for suppressor. To thin for me. Was planning to cut back to 20” and do 9/16 but never did it. A suppressor was one of the better firearm investments I’ve made. It’s really good if you have new shooters. I’m about to start the process for another one
I bet you get it before. I have had 3 Eform 4's come back and all were 100 days or less.
I have a few Silencerco Omega's... I would routinely go shoot my 300 WM with my toddler not 10 feet from me without any ear pro on. That is how quiet these can be. Recoil was mitigated to be on par with a 243.
mxracer317
Well-known member
- Joined
- Nov 20, 2020
- Messages
- 1,177
Hallelujah!!! Applied April 1.
I filed 4/11. Here’s to hoping for a July approval.
What do you think of the Banish 30? I’ve got one coming and another from silencer central.
Caseknife
Well-known member
I have a Banish 30 coming from Silencer Central, when I don't know. Started the process
Jan 10, Eform, must have been skipped over
Jan 10, Eform, must have been skipped over
It’s the only one I own but I love it. Wish I had done it years ago. Actually hate shooting a rifle without it anymore
BackofBeyond
Well-known member
I’m on the Banish 30 train as well. Filed end of May.
mxracer317
Well-known member
- Joined
- Nov 20, 2020
- Messages
- 1,177
BackofBeyond
Well-known member
Ya, does promo code RANDY knock any time off the NFA wait time?@Big Fin , where’s that Nosler discount??? I mean… this is for our health and wellness and all…
MarvB
Well-known member
Hammsolo
Well-known member
- Joined
- May 16, 2020
- Messages
- 1,946
Winna’ winna’ chicken mother fuggin’ dinna’!!!Nope, but it might get you a Christmas ornament
These are sweet. I can’t believe how much more enjoyable it is to shoot with a suppressor. My dad just shot my 7 mag with my Dead Air TI on it. He was blown away and was immediately doing research. Anyone know a good gunsmith in the Lewistown MT area that could thread a barrel to accept a suppressor?
Hammsolo
Well-known member
- Joined
- May 16, 2020
- Messages
- 1,946
Both my big game rifles are threaded. However, how does everyone feel about cutting barrels? I worry about lost velocity and accuracy. A salesman at Scheel’s tried to convince me neither would change much. I call BS on velocity for sure, but what about accuracy?
BackofBeyond
Well-known member
I have no personal experience with either, but have read that your Scheel’s homeboy wasn’t terribly wrong.
Shorter barrels are marginally stiffer than longer of the same profile, so theoretically accuracy would improve.
True, you’ll lose some velocity, but as @brockel has posted he didn’t loose a ton.
17” 6.5 prc 140 grain Berger vld 2820fps. Just as accurate as it was as a long barrel. Think it was 2950 at 22”
This. Don’t be afraid of chopping it.
BackofBeyond
Well-known member
And really @Hammsolo, the big thing is to get the process rolling for your tax stamp. You’ll have 7 - 9 months to decide about chopping barrels etc before you have your can in hand.
