noharleyyet
Well-known member
...clean your pm's MinnesotHunter
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I would take off the muzzle brake/flash hider and put on a thread protector.
https://www.amazon.com/AR15-223-Thread-Protector-Pitch/dp/B009PCCES0
The I would replace factory trigger with a CMC 3.5# flat trigger.
http://www.ebay.com/itm/CMC-Tactica...320158?hash=item33c7e9cbde:g:cOUAAOSw-0xYk5fa
Next, I would top it with a Vortex 4x12x40 with BDC.
https://www.amazon.com/Vortex-Optic...qid=1490649943&sr=8-1&keywords=vortex+4x12x40
I load 50gr Hornady z-max bullets over 26.8gr H335 and the BDC reticle on the scope is almost perfect out to 500yds
A couple of other tidbits
1. Number your magazines with a paint pen. AR mags are not meant to last forever, and if they are numbered it is easy to ID the bad ones.
2. Mount your red dot as far forward as you can on the receiver. This will reduces the size of the red dot in relation to the target and cause less tunnel visions, making it easier to aim precisely and shoot with both eyes open.
3. Upgrading your butt stock will make it easier for you to get a good cheek weld and as a result you will be able to shoot more accurately.
4. a new trigger is good advice.
Why a flat trigger?
Any reason for vortex over leopold? Im a leopold guy...
Personally, I just use the 30 round mag for a monopod while shooting prone.
like shooting on a teeter totter
2 different loads will probably impact differently. I shoot my hunting rounds year round because the target rounds I broke the barrel in with don't shoot anywhere close to the hunting round impacts.
Can be. Can also be pretty darned fast and effective. Is hitting 500m silhouettes effective enough?
The one it came with is adjustable, would I replace it with a fixed?
Never thought of number magazines, but I will do that!
The rifle comes with a free cerakote paint job as well! I was thinking white camo, has anyone done a custom paint? if so what did you do and would you suggest it?