npaden
Well-known member
Okay, so I'm shopping for a new trailer since my last one is now in the dump at Sheridan, Wyoming. Not really looking for a repeat of that.
I'm shocked at some of the nearly unbelievable deals out there right now on 5th wheel toyhaulers. After the shortages and then selling these things at straight list price for a while it seems that they are hanging out on the dealer lots and they are really wanting to move them. I'm seeing 50%+ discounts on them.
So I'm looking and found a few that I really like but I'm trying to sort through the hitch pin weights.
Here's the sticker from my door:
The trailer that I really like is 12,304 pounds and has a hitch pin weight of 2,460. So that it a little over 300 pounds less than the truck is rated for so looks like I'm good. Then I read that you need to add the estimated weight of the cargo and add 20% of that to the hitch pin weight. If I throw 3,500 pounds in there with machines and stuff then that adds 700 pounds to the hitch weight and that throws me over. I'm still under the max payload of 3,287 lbs on the door but if the family is in the truck we would be over loaded.
Reading online there is mixed information out there on whether the hitch weight goes up or down or stays the same when you load the machines in the back. It probably depends on the specific trailer and where the axles are. If adding the machines to the back has no affect on the hitch weight I think I'm okay. If the machines add 20% to the hitch weight I'm out.
Reading on the RV forums it seems like most of the full time RV'ers are going with dual rear wheel 1 tons for a trailer in that range. Probably the smart thing to do but I really am not wanting to get a truck that won't fit in my garage. I would rather get a smaller trailer since we only use the trailer 3 or 4 weeks a year and the truck is my daily driver.
Looking at bumper pulls I have found a few that are decent that don't have the rear enclosed garage like my last one did so I would be able to pull the machines up over the axle and distribute the weight better. These are all well within the weight limits on my truck.
More reading online says a 12,000 pound 5th wheel will pull down the highway as good if not better than a 9,000 pound bumper pull. Also read that the 5th wheel tracks narrower so making tight corners on a forest service road might be harder.
Here's the exact 5th wheel I'm looking at getting. https://www.funtownrv.com/product/new-2023-heartland-gravity-3570-1975785-26
They are willing to deal a little even off that already low price. This seems like the one to get if I can pull it safely. They have a smaller one for about the same price but it is only 100 pounds less on the hitch weight so not sure if that is going to matter.
I've got the bumper pull option pretty much narrowed down to a used Heartland Stryker 2916 - https://cruiserrv.com/rv-model/stryker-st2916/
It has the ability to pull the machine up over the axles which is going to be a requirement if I stay with a bumper pull. I've found a couple of these used on Facebook marketplace for $35,000ish for a 2021. Seems like the brand new 5th wheel would be a better deal but not if I can't pull it safely.
Oh well, Hunt Talk has always been a good source of advice for me in the past so I thought I would throw this out there to see if I can get some real world input from folks that might have some personal experience pulling 5th wheels vs. bumper pulls.
Right now my heart is telling me to make the jump to the awesome 5th wheel at the amazing price, but my gut is telling me that I should probably stick to the bumper pull that is well within the specs of my truck.
Thanks for any input. Nathan
I'm shocked at some of the nearly unbelievable deals out there right now on 5th wheel toyhaulers. After the shortages and then selling these things at straight list price for a while it seems that they are hanging out on the dealer lots and they are really wanting to move them. I'm seeing 50%+ discounts on them.
So I'm looking and found a few that I really like but I'm trying to sort through the hitch pin weights.
Here's the sticker from my door:
The trailer that I really like is 12,304 pounds and has a hitch pin weight of 2,460. So that it a little over 300 pounds less than the truck is rated for so looks like I'm good. Then I read that you need to add the estimated weight of the cargo and add 20% of that to the hitch pin weight. If I throw 3,500 pounds in there with machines and stuff then that adds 700 pounds to the hitch weight and that throws me over. I'm still under the max payload of 3,287 lbs on the door but if the family is in the truck we would be over loaded.
Reading online there is mixed information out there on whether the hitch weight goes up or down or stays the same when you load the machines in the back. It probably depends on the specific trailer and where the axles are. If adding the machines to the back has no affect on the hitch weight I think I'm okay. If the machines add 20% to the hitch weight I'm out.
Reading on the RV forums it seems like most of the full time RV'ers are going with dual rear wheel 1 tons for a trailer in that range. Probably the smart thing to do but I really am not wanting to get a truck that won't fit in my garage. I would rather get a smaller trailer since we only use the trailer 3 or 4 weeks a year and the truck is my daily driver.
Looking at bumper pulls I have found a few that are decent that don't have the rear enclosed garage like my last one did so I would be able to pull the machines up over the axle and distribute the weight better. These are all well within the weight limits on my truck.
More reading online says a 12,000 pound 5th wheel will pull down the highway as good if not better than a 9,000 pound bumper pull. Also read that the 5th wheel tracks narrower so making tight corners on a forest service road might be harder.
Here's the exact 5th wheel I'm looking at getting. https://www.funtownrv.com/product/new-2023-heartland-gravity-3570-1975785-26
They are willing to deal a little even off that already low price. This seems like the one to get if I can pull it safely. They have a smaller one for about the same price but it is only 100 pounds less on the hitch weight so not sure if that is going to matter.
I've got the bumper pull option pretty much narrowed down to a used Heartland Stryker 2916 - https://cruiserrv.com/rv-model/stryker-st2916/
It has the ability to pull the machine up over the axles which is going to be a requirement if I stay with a bumper pull. I've found a couple of these used on Facebook marketplace for $35,000ish for a 2021. Seems like the brand new 5th wheel would be a better deal but not if I can't pull it safely.
Oh well, Hunt Talk has always been a good source of advice for me in the past so I thought I would throw this out there to see if I can get some real world input from folks that might have some personal experience pulling 5th wheels vs. bumper pulls.
Right now my heart is telling me to make the jump to the awesome 5th wheel at the amazing price, but my gut is telling me that I should probably stick to the bumper pull that is well within the specs of my truck.
Thanks for any input. Nathan