JV842
Well-known member
Here’s a better pic of her…shows off the wood more
Found One….#1 that is
- Thread starter JV842
- Start date
Here’s a better pic of her…shows off the wood more
Salmonchaser
Well-known member
- Joined
- Nov 12, 2019
- Messages
- 2,461
She is a sweet looking rifle.
JV842
Well-known member
She shot okay…1.25”….with multiple shots….wasn’t really doing “3shot groups” I was breaking in the barrel…w cleanings in between 1 shot put to 9 shots….then every third for the following 15…shot 6 at 50yds n touched holes…15 at 100yds 1.25”…..3 at 200yds 3”+
Barrel was pretty hot by the end
Should be able to get her moa or sub w playing w some loads n bullets
Fun little rifle. Very low recoil n easy handling. Love the fit
Can’t wait to get her in the field!!!
Paul T
New member
Paul T
New member
I pick up my No. 1 International a while back for about 1/2 what they were selling for on line. Perfect condition, 270. Loaded up some 150 gr Partitions, chronoed at 2800, nice for a short barrel. Accuracy very good with 1.5 MOA being consistent. Best handling rifle I've ever owned. Took several deer with it this last year, no spectacular shooting, just very comfortable and easy. I'm looking forward to spring bear, I'll have to see if the rifle is lucky as well as pretty.
Salmonchaser
Well-known member
- Joined
- Nov 12, 2019
- Messages
- 2,461
They are sweet to carry. Think my 275 Rigby is the best balanced scope rifle I've carried.
BrentD
Well-known member
Not my gun, not my kinda gun, but closish...
live.amoskeagauction.com
I don't know the seller, but he is on another hunting forum and the auction house is top drawer in my experience.
Wonderful Custom Engraved Ruger No. 1 Falling Block Rifle
serial #3960, 222 Rem, custom C.R. & P.J. Hart 25 1/2” barrel with a bright excellent bore. This lovely rifle includes a note from the consignor detailing the various custom features as well as by whom and when the work was performed. The 243 Win-chambered rifle was purchased new around 1970 and...
I don't know the seller, but he is on another hunting forum and the auction house is top drawer in my experience.
noharleyyet
Well-known member
Nice rifle and caliber...Not my gun, not my kinda gun, but closish...
Wonderful Custom Engraved Ruger No. 1 Falling Block Rifle
serial #3960, 222 Rem, custom C.R. & P.J. Hart 25 1/2” barrel with a bright excellent bore. This lovely rifle includes a note from the consignor detailing the various custom features as well as by whom and when the work was performed. The 243 Win-chambered rifle was purchased new around 1970 and...
I don't know the seller, but he is on another hunting forum and the auction house is top drawer in my experience.
Redmt
Well-known member
I couldn't find a stainless laminate 6.5 laminate so I called Ruger. They never made one! I sent my original #1 22-250 to Wayne York and he is boring and rechambering it to 6.5 CM. I figured while he's got it in hand I might as well have the barrel fluted. I'm hoping to get it back in the next couple weeks. He told me before I sent it that it was going to be at least 3 months. I'm like a little kid waiting for my birthday.
Salmonchaser
Well-known member
- Joined
- Nov 12, 2019
- Messages
- 2,461
I like Wayne, he's very busy, if he gets you out in three months that's good.
Redmt
Well-known member
He sounds like a man of his word with some pretty good recommendations. I don't really expect it to be in my hands by first week of September but pretty soon after.
Salmonchaser
Well-known member
- Joined
- Nov 12, 2019
- Messages
- 2,461
I don’t know if he mentioned it to you, he and his son are both #1 fans. Always seem to be a couple of those hanging around his shop. I don’t know how many titles he holds but he was always standing on the podium when he was competing in IPSC and other events when he was an Oregon State Trooper. I was never on the line when he was but I was at some of the same events when I was a rookie. I never got close to his level however. One of just a few pistolaros I was greatly impressed by.
Redmt
Well-known member
My conversations with Wayne have been short and on point. I took recommendations from both you and p-ham and am very confident that when I get my rifle back that it will be better than expected. He has been straight up about the timeline in every conversation. I check in around the first of each month. My last call was around 8/1 and he stayed on potential schedule that he would probably be starting work on it sometime around now. So for however long it takes to get everything done is fine with me although I would like to hunt it this year for A zone which ends 9/22. If not then I'll still have a very nice rifle for piggies and deer hunting in the future.
BackofBeyond
Well-known member
Resurrecting this thread, because I too have done a thing.
Pick it up on Friday.
Pick it up on Friday.
44hunter45
Well-known member
I smell a Nevada road trip in your future.
BackofBeyond
Well-known member
Salmonchaser
Well-known member
- Joined
- Nov 12, 2019
- Messages
- 2,461
Well welcome to the club. Which variant and cartridge did you select?
BackofBeyond
Well-known member
It’s an RSI model, so Mannlicher stock, but has been rebarreled to a 6.5x55 Swede.
Redmt
Well-known member
Welcome to the 6.5 cult no matter what brass you stick behind it.
