Sitka Gear Optifade Cover

Christensen Arms, what's the verdict?

It works fine with the Remington ammo haven't tried anything else except the Nosler..🤷‍♂️ maybe it just don't like them..but for the cost of the gun it should should anything..I'll see what CA says..
 
Picked up a Mesa fft 300 prc in August. It's light and shoots really well. Hand loading 190 grain Hornady CX at 3015 fps. Not really a complaint, but the bolt isn't really that smooth. While it isn't hard to close, it definitely feels snug even without chambering a round. Also notice with shells in the magazine, cycling rounds scratches the brass slightly. Overall, I'm pretty happy with the rifle and would buy another if I was looking.
 
My CA had issues at first with Nosler ammo sticking. Switched to Weatherby select and all is good. Only stuck about 3 times, never while hunting
 
Bought a Ridgleline in 7mm RM in 2022 and a Mesa in 308 in 2023. Understanding I would need a day for 'break in', I just got the chance to shoot them both in. I was hoping that some of the negativity I read would not be my experience, and was happily rewarded. According to CA, you need to break-in the rifle for the MOA guarantee, which consists of shooting 50+ rounds and cleaning (according to their instructions) every 5-6 shots. It was a little time consuming, but definitely got my acquainted with the guns. Both guns shot very well without issue and shot under the MOA guarantee off bags. My Ruger M77 MkII in 308 loves 150g Hornady Superformance SST, the CA 308 Mesa did not. Was ok with the 165 SST's, but loved Norma 150g Whitetail. The 7mm RM, also shot the Norma 150g Whitetail well, along with 165g Bond Strikes, and Winchester 150g Deer Season. (So it shot everything I had my shooting bag well). Both operated seamlessly and I enjoyed shooting both. The brakes noticeably tamed recoil as compared to shooting with the thread protector.

If you do buy a CA, make sure you read, understand, and perform the break in/cleaning procedure and complete it. You will need a few boxes (3-4) of shells and it would be smart to get a few different boxes to see what the gun likes. Good luck!
 
Bought a Ridgleline in 7mm RM in 2022 and a Mesa in 308 in 2023. Understanding I would need a day for 'break in', I just got the chance to shoot them both in. I was hoping that some of the negativity I read would not be my experience, and was happily rewarded. According to CA, you need to break-in the rifle for the MOA guarantee, which consists of shooting 50+ rounds and cleaning (according to their instructions) every 5-6 shots. It was a little time consuming, but definitely got my acquainted with the guns. Both guns shot very well without issue and shot under the MOA guarantee off bags. My Ruger M77 MkII in 308 loves 150g Hornady Superformance SST, the CA 308 Mesa did not. Was ok with the 165 SST's, but loved Norma 150g Whitetail. The 7mm RM, also shot the Norma 150g Whitetail well, along with 165g Bond Strikes, and Winchester 150g Deer Season. (So it shot everything I had my shooting bag well). Both operated seamlessly and I enjoyed shooting both. The brakes noticeably tamed recoil as compared to shooting with the thread protector.

If you do buy a CA, make sure you read, understand, and perform the break in/cleaning procedure and complete it. You will need a few boxes (3-4) of shells and it would be smart to get a few different boxes to see what the gun likes. Good luck!
"Proper" rifle break-in is largely a myth and will not impact the accuracy of a rifle. My guess is that most CA rifles shoot fine, but a LARGE percentage of them of lemons (with respect to other manufacturers).
 
Mine seems to be breaking in still. 80 shots and still speeding up. Feeding is getting better and accuracy seems decent.
 

Attachments

  • 20241026_130936.jpg
    20241026_130936.jpg
    2.2 MB · Views: 16

Latest posts

Forum statistics

Threads
113,397
Messages
2,019,724
Members
36,154
Latest member
hawk1000
Back
Top