AIM STR8
Member
seems like a pretty simple way to align the crosshairs with the action ....
Action Leveling
- Thread starter Richard22
- Start date
WapitiBob
Well-known member
Hang a plumb bob on the door, turn out the lights, and shine a flashlight thru the scope. Or take a 4' level to the range and set it up at 50-100 yards.
Wind Gypsy
Well-known member
- Joined
- Mar 12, 2017
- Messages
- 2,346
Just pull your head back and look if the reticle is lined up with the center of the action/bore - done.
This. It's really not hard.
What reference on the action does this tool use to ensure the action is level?
Potsie
Well-known member
Again, for the kids in the back - leveling the action does nothing.
Not a thing.
Nada.
Nichego.
Nichts.
AIM STR8
Member
It's using a flat surface on the action that is parallel with the scope base. If there are no flat parallel surface then it is prolly useless.
All it's doing is helping the user to "visually" align the horizontal crosshairs with the horizontal BLACK lines on the tool and making the vertical crosshair thru center of bore. You could lay the rifle on the kitchen table side ways and still align the crosshairs with said tool. Not sure where the level part comes into play.
But, like others have said there are other ways (easier?) to achieve the same results.
