MKotur325
New member
I hope your results vary from mine... I ran a few tests of RL-17 and just couldn't get it to shoot worth a dang... I don't remember what the velocity was like, but I couldn't get it under 1.5 MOA.
325 wsm
- Thread starter Ben Lamb
- Start date
Bet it wouldn't bounce off anything!That seems entirely too reasonable.
Although I don't think a 200 gran TTSX would do well in a standard 8x57JS.
TheJason
Well-known member
- Joined
- Oct 21, 2024
- Messages
- 18,561
what about RL16?
Lots of cartridges can do that just as "handily". mtmuley
MT_Chad
Well-known member
Ben, when I was in Cabelas in billings over the summer they had a browning in 325 that was left handed. It was cheap too, like 400 bucks IIRC. Being a lefty it might still be there. It was a fancy wood one too, if it's still there it might be a match made in heaven.
klampson
Well-known member
- Joined
- May 5, 2019
- Messages
- 311
I had a 325 wsm built a few years back on a Win 70 action, and have zero complaints. Wanted a pack rifle with a shorter barrel than the 300 win I was carrying (still LOVE this cartridge). Could have gone with 300 wsm, but decided to do something different. Almost had the rifle chambered in 35 Sambar aka 35 wsm.
I've found the 325 to be pretty versatile. I really like Barnes 160 ttsx for deer and hogs, and 200 gr Accubond for elk. Just loaded up some 180 gr GMXs for a cow hunt this fall. Super accurate in this rifle, and heck, I just like to mix things up. Probably why I own to many rifles.....
I've found the 325 to be pretty versatile. I really like Barnes 160 ttsx for deer and hogs, and 200 gr Accubond for elk. Just loaded up some 180 gr GMXs for a cow hunt this fall. Super accurate in this rifle, and heck, I just like to mix things up. Probably why I own to many rifles.....
runningmt
Well-known member
- Joined
- Apr 25, 2018
- Messages
- 717
No experience, but I bet it would be an incredible elk round. Versatile if you’re reloading, maybe not so much if you’re depending on factory loads. I experience that same thing with my .264 WM
325 WSM
Member
As my screen name would indicate I too have experience with the 325, I have a browning A-bolt & really like it. Surprisingly easy on my shoulder, fun to shoot. I was lucky enough to stock up on a lot of reloading components when i bought it so I'm set.
elkhnter
Well-known member
Someone ask on another forum about a dedicated elk rifle. My answer was I have 3. I love my 673 in 300 saum and the Weathermark in 300. If I could only keep one, it’d be the Model 70 in .325. A short action, pushes a 200 grain Barnes at 2900 fps. What’s not to love?
Doublegunner
Active member
- Joined
- Nov 1, 2018
- Messages
- 267
It's a cool cartridge for sure but I think it will be abandoned by ammo makers eventually. If you can load for it I would stock up on brass. Otherwise it's a great performing cartridge that should be more popular.
turbobrick
Well-known member
So, say I was planning on building a Remington Model 7 with a magnum bolt face. Is there any reason the 325 WSM wouldn't be a great choice? I was planning on 300 WSM but 8mm really intrigues me.
The lack of available loaded ammunition for the 325 over the 300 if you don't reload. Even if you reload the selection for .323 bullets is nothing compared to the selection of .308 bullets. I have both cartridges but if I was going to build a rifle it would be the .300 wsm just because of the availability of bullets. If you don't reload, I would suggest the .300 wsm hands down. If you reload and want something different go with the .325 wsm.
turbobrick
Well-known member
Yeah, I’m a big reloader, and I see that stocking up on brass would be an important factor. My main sticking point right now, is that the only suppressor that I currently have that would work with .325 projectiles is heavier than I’d want to use on a light rifle. Maybe I’ll just build the ultralight with 300wsm and pick up a nice used 325 to try out.
Ya I would go with the ultralight 300 wsm and pick up a used 325. You can find good deals on them because the lack of available ammunition, I got my 325 model 70 extreme weather for 750. If you want the correct head stamp then 325 brass can be hard to find, if not just neck up the plentiful 300 wsm brass.
Bambistew
Well-known member
I have a 300WSM in a rem 700... it doesn't feed/function nearly as well as either of the M70's I have in 325. The mag only hold 2 down vs 3 in the M70s. The mag box of the Rem is a touch shorter, and it jams occasionally (inside the magazine) which is a total cluster F. I like the 325, but its not anything better/different than the 300. 180gr vs 200gr at the same speed is not noticable in the field... but fun to have something different.
elkhnter
Well-known member
Sorry for dragging this one back up, but had to brag a little.
Putting together a 200 grain Partition load. Looking for a powder that it likes and 3 set of 3, bam! W760, who would have guessed. Pretty happy, but, gonna play with the 200 AB.
Putting together a 200 grain Partition load. Looking for a powder that it likes and 3 set of 3, bam! W760, who would have guessed. Pretty happy, but, gonna play with the 200 AB.
elkhnter
Well-known member
Yep, I just picked up 100 pieces of new Winchester brass. Comes around a couple times a year.
D4570
Well-known member
Verry underrated chambering indeed.
It is a shame there are not many mainstream bullet offerings.
I shoot an 8mm rem mag and have narrowed it down to two bullets.
Serra 220 and Barnes 200 TSX.
The 200 with a full case of RL26 averages at 3200 fps with a variance of under 25 fps.
The 220 full of rl26 is 3100 fps and about the same variance.
In my Rem 700, I can do a 5" group at 500 yards lasered ranged.
The 325 case is a bit smaller... Never try an 8mm Mauser bullet in the 325 and don't use bullets for an 8 mag or 325 in an 8 Mauser.
It is a shame there are not many mainstream bullet offerings.
I shoot an 8mm rem mag and have narrowed it down to two bullets.
Serra 220 and Barnes 200 TSX.
The 200 with a full case of RL26 averages at 3200 fps with a variance of under 25 fps.
The 220 full of rl26 is 3100 fps and about the same variance.
In my Rem 700, I can do a 5" group at 500 yards lasered ranged.
The 325 case is a bit smaller... Never try an 8mm Mauser bullet in the 325 and don't use bullets for an 8 mag or 325 in an 8 Mauser.
