.270 Powders

[Brian in Montana]

I'm not too far down the road on load development for my wife's .270, I've tried a couple things, but I was wondering what you guys recommend especially in terms of powders to try.

 

[mtmander]

I use H4831 , a mild load gives me the best accuracy in a 130g bullet

 

[shootbrownelk]

IMR 4350.

 

[VikingsGuy]

H4831SC (same as H4831 but extrusion cut shorter for more precise weighing and packing) and H4350 are my favs for 270.

 

[BRI]

I'm loading for 2 different 270 and they both shoot 4831SC really well.

 

[N2TRKYS]

I really want to use H4831SC, but it has proven way too slow(velocity wise) for me.

 

[Tjay]

N2

R-26 will get the speed. I ran a test yesterday with 130 gr. E-Tips and got to 3144 fps with no pressure signs.

 

[MThuntr]

I'm using Hybrid 100V right now...140grain Partitions are going right around 3000. This rifle is going being switched over to non-lead and I think H4831SC is where I'm going to start.

RL-26 should be able to push a 150grain bullet over 3000fps easily though that stuff may be hard to find.

 

[N2TRKYS]

N2

R-26 will get the speed. I ran a test yesterday with 130 gr. E-Tips and got to 3144 fps with no pressure signs.

RL26 has been my go to for 25-06, 270 Win, and 7 SAUM. It's good stuff.

 

[JLS]

Is there any load data for RL-16? I am getting excellent speed out of it in my 280

 

[timk270]

IMR 4350

 

[.270]

I use H4831sc with 129 lrx and RL26 with 145 eldx. Both powders work good for my rifle.

 

[mtmuley]

I'm a velocity junky. So far RL-19 with 140's. mtmuley

 

[AggieOutlaw]

IMR 4350.

I'm intrigued. How's the accuracy?

I've been happy with 4350 in 6.5

I've been using IMR4955 with meh results.

 

[7mm08mo]

H4831 is the best in mine.

 

[Brian in Montana]

Its not fully refined, but I did pretty good with 53.2 grains of H4350 and a 130grn Interlock. MV is around 2900. Anyway, we have several plugs for IMR4350 on this thread; how much different is that from H4350?

 

[Kenscot270]

Another vote for h4831. Sub moa with 130 Nosler partitions in two different rifles

 

[GlockZ]

IMR 4831 or 4350 do well, my go to powder for my 270 is H4350 with a 130 gr. Barnes TTSX. I like the H4350 the best due to the consistent velocity and accuracy over a wide temperature range.

 

[theddguide]

I found imr 4831 to produce faster and more accurate loads with 130 accubonds than h4831sc in my 270.

 

[shootbrownelk]

I'm intrigued. How's the accuracy?

I've been happy with 4350 in 6.5

I've been using IMR4955 with meh results.

Accuracy is fine, I loaded mine well below max charges.