Advertisement

25-06 RL 23

Redmt

Well-known member
Joined
Feb 12, 2021
Messages
3,372
Location
San Antonio Valley California
I still looking for a decent starting recipe for my 25-06 with 100 gr. Barnes or Federal Trophy bullets . I've tried H4350 and Staball 6.5 so far with both bullets . The H4350 and the Federal has been the best so far but not great. I have an unopened RL 23 I'm thinking on trying but can't find a copper bullet starting point. Any suggestions from anyone?
 
Oh, okay, I don’t have any experience with those options. Sorry for the bad info. Let me know what you find out.
 
This is from the Alliant website. I'd start with the NBT load and back off by 10%:

1738955548302.png

Hammer lists RL23 in the 100gr. range but Barnes load data and Hammer load data is not exactly apples to apples, given the Hammer's lower bearing surface:

1738955679569.png
 
I saw the Alliant guide and was thinking I'd start around 50gr. If I didn't come up with anything
Yeah, that would put you around 92% as a starting load. I'd work up in one-grain increments to 55 or to where you hit pressure.

Still have those TTSXs/TSXs if you need them.
 
Last edited:

Forum statistics

Threads
114,623
Messages
2,065,068
Members
36,678
Latest member
emmanueleric121
Back
Top