Big Sky Guy
Well-known member
- Joined
- Dec 10, 2018
- Messages
- 553
I’ve been using trail cameras on public land sparingly here in Montana for several years. I accept the risk and was honestly surprised it took over 3 years to have my first camera stolen. I’ve had people mess with them in the past and I always took that as a sign to take it down and move on.
This post isn’t to share my disappointment (I only use $30 camofire cameras) as little money was lost, it’s an accepted risk and I’m not really even upset with whoever told it. It’s always a thrill for me to check it in the spring to see what was in there over the winter so I didn’t get to experience that, o well.
I just wanted to share this to see how you think they got the trail camera off the tree. I don’t use cable locks, but instead have used wire and then twisted it tight. While not as much protection as a cable, it requires pliers or wire cutters to get it off. My thought process has always been if someone really wants to take it down they can hike back in with cable/bolt cutters and the same thing with wire (although there is probably a higher chance of people carrying a multi tool with them than cable cutters).
Regardless, what has me perplexed is that the wire was in tact and seemingly not even bent much. These photos show the back side where the wire was twisted and the front where the camera was.
I am left to think they busted/sawed through the plastic loop holes that the wire went through. Any other possibilities I’m missing? I’ll probably forego using wire, since it didn’t seem to help ha.
This post isn’t to share my disappointment (I only use $30 camofire cameras) as little money was lost, it’s an accepted risk and I’m not really even upset with whoever told it. It’s always a thrill for me to check it in the spring to see what was in there over the winter so I didn’t get to experience that, o well.
I just wanted to share this to see how you think they got the trail camera off the tree. I don’t use cable locks, but instead have used wire and then twisted it tight. While not as much protection as a cable, it requires pliers or wire cutters to get it off. My thought process has always been if someone really wants to take it down they can hike back in with cable/bolt cutters and the same thing with wire (although there is probably a higher chance of people carrying a multi tool with them than cable cutters).
Regardless, what has me perplexed is that the wire was in tact and seemingly not even bent much. These photos show the back side where the wire was twisted and the front where the camera was.
I am left to think they busted/sawed through the plastic loop holes that the wire went through. Any other possibilities I’m missing? I’ll probably forego using wire, since it didn’t seem to help ha.
Attachments
Last edited: