Muleyfanatic
Active member
Grim reaper fatal steel 125 gr
Complete pass thru 42 yards.
Complete pass thru 42 yards.
Last edited:
Thinking of switching from fixed blade to mechanical broadheads
- Thread starter jpcoll01
- Start date
I mean, they all hit “straight". Unfortunately, the target rotated with each shot.
glass eye
Well-known member
The arrow with the deepest penetration.
Dan O
Well-known member
Also, you can see the cuts from the blades. LOL
Nope. And that’s the point of sharing the photo- properly tuned fixed blades in a properly tuned bow have the same point of impact as field points. They’re about an inch low at 70, but I don’t think anybody here is taking shots like that in a hunting situation.
I’ve seen far too many mechanical failures to ever trust them on the one moment that you invested multiple days of hunting, and months of preparation to get to. In engineering, they teach you success comes down to KISS-
Keep
It
Simple,
Stupid
Oh, look at you, with your fancy zoom. Just be glad I was using that target, and not the other one that’s been shot to hell.
That's what I went with.
NYyotekiller
Well-known member
Grim Reaper and Sevr are the only two mechanical options that I would recommend.
kevine001
Member
- Joined
- Aug 14, 2023
- Messages
- 74
I use to carry Rage mechanicals with a couple G5 Montecs in case there was any brush or grass in the way. The mechanicals flew straighter IMO. The Montecs just pushed through stuff better. I've now switched to fixed two blade. Best of both worlds. I'm running the 100g Stingers. Not the largest cut, but I believe shot placement is one of the most important factors. The accuracy of the stingers have been incredible compared to the Montecs and rages. Just my 2 cents.
Roughwater
Active member
- Joined
- Sep 11, 2015
- Messages
- 246
Good for you! I mainly commented because you were in the Core. Semper Fi! 1968-1972 USMC, American Legion member, RMEF life member.
Dinkshooter
Well-known member
I was always a mechanical naysayer.
One day I was in Walmart and Rage BHs were on clearance.
I've shot 2 antelope with them. The first one quartering away. It was so gross as the lope did a 30 yard death spiral, blood mist coming out the front, with all it guts falling out to boot. Done in about 25 seconds.
2nd one, broadside. He was drinking water, in the millisecond it took for the arrow to hit and him react, he must have left a 1/2 gallon of blood in the water. Ran 30 yards on his face and tipped over forward.
I shot a Mtn Goat with them, first shot quartering away, little back. When he jumped out of his bed I tried a follow up Texas Heart shot, didn't hit perfectly on that one one but he didn't go 100 yards. The holes in that hide look like I killed it with a machete. Or an Official "Rambo" Knife.
I have the elk hunt of a lifetime coming up, little leery there. Have some fix blades tuning up, but number 5 in my quiver is a Rage expandable in case shit gets western and long.
One day I was in Walmart and Rage BHs were on clearance.
I've shot 2 antelope with them. The first one quartering away. It was so gross as the lope did a 30 yard death spiral, blood mist coming out the front, with all it guts falling out to boot. Done in about 25 seconds.
2nd one, broadside. He was drinking water, in the millisecond it took for the arrow to hit and him react, he must have left a 1/2 gallon of blood in the water. Ran 30 yards on his face and tipped over forward.
I shot a Mtn Goat with them, first shot quartering away, little back. When he jumped out of his bed I tried a follow up Texas Heart shot, didn't hit perfectly on that one one but he didn't go 100 yards. The holes in that hide look like I killed it with a machete. Or an Official "Rambo" Knife.
I have the elk hunt of a lifetime coming up, little leery there. Have some fix blades tuning up, but number 5 in my quiver is a Rage expandable in case shit gets western and long.
Flatbrimmer
Well-known member
I don’t know to love or laugh but I’ve been thinking of getting a pack to have, and this is priceless information
Badlandcat
Active member
Don't switch
jpcoll01
Well-known member
- Joined
- Jan 14, 2021
- Messages
- 502
So I used a SEVR 1.75” 125 grain on a bear last weekend in Canada and it cut a serious hole. Very little blood at impact site but then it spilled buckets. Wouldn’t use on an elk but seemed about perfect for a black bear. If everything goes well I will try one on a Montana antelope this week!
steveshuntn1
Well-known member
I’ve only shot whitetails with them but I’ve never lost a deer with Rage heads. Watched most of them fall over. I shoot the 150 trypan and it’s a guaranteed pass through on deer.
sclancy27
Well-known member
- Joined
- Nov 23, 2022
- Messages
- 616
Just make sure your KE is pretty high. I've switched mostly to mechanicals the last 3-4 years simply do to the fact that they are more forgiving with both shot execution and larger cutting diameters tend to make shorter blood trails on marginal shots, at least in my experience. I've shot 1.7 and 2" mechs, but I am @ 90-91 lbs of KE.
Bennitto
New member
- Joined
- Oct 12, 2016
- Messages
- 13
I have been running Grim Reaper 125gr mechanicals for around 15yrs now. They shoot like a field point. Accuracy is amazing.I have not had any bad experiences or lost game animals as others have mentioned. All of my shots are 40yds and under with most happening between 20 and 25yds. I've taken a good number of mule deer with them and a few elk as well. They have deployed consistently and have had good penetration. I will note that when the blades hit heavy bone they tend to break. That being said most of my kills have been broadside pass-throughs that aren't hitting heavy bones. My last elk was quartering towards at 25 yds. The arrow slipped past the forward shoulder, hit lung, and traveled through to the off side rear hip joint where it imbeded. The elk went 60 yds and fell over. Overall I really have been impressed with Grim Reapers products. Decent price point and great performance.
Attachments
Only thing I can say about mechanical is 'stay away'. I have used them in the past but too many times they failed to open as designed and the result was a good shot placement that only lead to game I could not recover. Since then I have used fixed (none replaceable) broadheads with excellent results. It's not how big a hole you make but rather where you put that hole.
Tlrussell
Active member
I’ve killed lots of deer with rage.
Grim reapers now
I have killed lots with them.
antelope to elk.
I shoot a 560 grain arrow. 280fps
Never had an issue
Zipped one through an antelope yesterday.
Dinkshooter
Well-known member
560gr ? WoW! I'm guessing fancy inserts and weight inside? do tell.
Gut Shot
Well-known member
If it aint broke don't fix it. The only reason I see to switch from a fixed blade to a mechanical is if you are having accuracy issues with fixed blade.
