Leupold BX-4 Rangefinding Binoculars

Smoked ven. Snack sticks with high temp cheese and pepper flakes

Stay Sharp

Well-known member
Joined
Dec 12, 2019
Messages
605
Location
Wisconsin
Im evaluated some products from Frisco Spices. in this case its their snack stick seasoning so I pulled a bunch of venison trim out of the freezer as well as pork shoulder trim. I used 16 pounds of Venison and 9 pounds of pork shoulder and gave it a few days to thaw in the cooler.

snacks1_zpsb9860529.jpg


I ground the meat the night before stuffing through the 3/8 plate.

snacks2_zps0bf425ed.jpg


I grind the night before the smoking because the cure (Sodium Nitrate) is added to the meat and it needs time to cure the meat.

These sticks will also have mixed in with the meat some dehydrated and crushed Jalapeno as well as high temp cheese.

snacks3_zpsf4be5944.jpg


This is the cure/salt. It normally pinkish in color.

snacks4_zpsbebc84d0.jpg


I mix the seasoning and cure and jalapenos with 3 cups of water to better distribute it with the meat. Trying to mix dry seasonings with ground meat never works well and you end up with pockets of over seasoned as well as pockets of underseasoned meat. The cheese will be added later.

snacks5_zps326c9fcf.jpg


After seasoning and mixing the meat is packed tightly so there are no air pockets and then covered and removed to the cooler overnight so the cure can do its work.

snacks6_zps62d9a70b.jpg


Te next morning I preheated the old smokey II and then ground the meat a 2nd time. This time through a 1/8 inch hole plate.

snacks7_zpsae0a7c1f.jpg


The cheese is added right before stuffing.

snacks8_zps9f2073fa.jpg


Its kept frozen until its poured over the meat and then mixed in with the meat for even distribution.

snacks9_zpsda93ecd3.jpg


snacks91_zps19ae21c4.jpg


Then half is loaded into the 100 year old Enterprise stuffer and the wife and I get to work.

snacks92_zps279da199.jpg


I normally use 19mm collagen casings but this package came with 21 mm so they will finish out a littler larger in diameter than my finger. Larger diameter just mean more time in the smoker.

snacks93_zpsfbeff8eb.jpg


The stuffer tube I made will work for as small as 18mm (3/8 of an inch

snacks94_zps416259a6.jpg


Collagen casings are edible but unlike natural casings do not need to be rinsed in water. They are used right from the package. I turn the crank and my wife regulates the fill to make sure they are not underfilled and so they don’t burst. Collagen will split and burst if you try to get them too full

snacks95_zpsd376068e.jpg
 
The lengths are coiled during stuffing. Its just easier to manage them that way.

snacks96_zpsa02f598a.jpg


I start with the smoker preheated to around 100F and all dampers open. The coils are then straightened out and since my smoker was built with lots of head room, I cut them into 66 inch lengths and pinch the center where they will hang on the smoke sticks.

snacks98_zps60cf63e3.jpg


For these sausages I will use a mix of Hickory and Pecan chunks.

snacks97_zps74cc125e.jpg


After one hour of dry time I add the wood chunks to start smoking. Less in more when it comes to smoking sausage. You don’t want soot or ash so a little smoke is all that’s needed.

snacks99_zpseedbf385.jpg


Throughout the morning and afternoon I slowly raise the temp to 180F. I have a remote probe in one stick of sausage so I can monitor the batch. When they get to 170F the door is opened and they are allowed to cool in the smoker.

snacks991_zps9b3994dc.jpg


The distribution of cheese and jalapeno flakes looks good.

snacks992_zps12513c63.jpg


When cool enough to work with, they are removed from the sticks and then cut into manageable lengths. They then are placed in the cooler overnight and then vacuum sealed. 25 pounds of meat with the water, cheese, spices and jalapenos came out to 30 pounds of pre-smoked sausage. The final weight of the finished product was 20 pounds.

snacks994_zps5e2c64dd.jpg


snacks995_zpse24b0ede.jpg
 
Excellent post and pictures. The results look good, even professional. I appreciate the photos of your ingredients, especially the high temp cheese. It led me to another, more affordable source for the cheese. We recently used a high temp cheese for the first time in a smoked jalapeno-cheddar moose summer sausage. It turned out great. We also smoked moose jerky sticks. Both have been perfect along with crackers and cheese for some holiday parties.
 
The cheese really improves the sausage. It adds a level of creaminess and moisture. I produce large quantities of smoked sausage and get a lot of compliments on the added cheese.
 
Timely thread. Last week I received cheddar and hot pepper cheese from Frisco. Have you tried their summer sausage seasoning?
 
Great thread and pictures. I've done similar with moose plus garlic.
Your final product looks fantastic!
 
What kind of smoker is that?

I like the process you have shown here getting from beginning to end. I bet I could use paneer in place of the high temp cheese (since it does not melt) and go for a slightly different flavor profile. I wanted to do jerky sticks for a while, and now you have my gears turning.

Thanks.
 
We don't use a smoker at all, but still like all of the mixes. We generally use Cabela's, but may have to try the Frisco, with your seal of approval. We have used the high-temp cheese and like it.
 
What kind of smoker is that?

I like the process you have shown here getting from beginning to end. I bet I could use paneer in place of the high temp cheese (since it does not melt) and go for a slightly different flavor profile. I wanted to do jerky sticks for a while, and now you have my gears turning.

Thanks.
I think it’s a homemade smoker dude. I’m pretty sure he made a build along thread about it.
 
What kind of smoker is that?

I like the process you have shown here getting from beginning to end. I bet I could use paneer in place of the high temp cheese (since it does not melt) and go for a slightly different flavor profile. I wanted to do jerky sticks for a while, and now you have my gears turning.

Thanks.

 
Kenetrek Boots

Latest posts

Forum statistics

Threads
113,687
Messages
2,029,743
Members
36,285
Latest member
Morshlerb
Back
Top