Seekins PH2 or Element Stock WTB

CoHunter1991

CoHunter1991

Active member
Joined
Jan 18, 2021
Messages
325
Two Questions for everyone, does anyone know where I can buy a Seekins stock? I love the ergonomics and stiffness of them but cannot find them anywhere to buy and seekins does not sell them individually. Second, the Seekins PH2/ element is a Rem 700 clone correct? So the stock should fit most 700 clone actions? I am looking to buy and put my Christensen Mesa in one. Thanks for all the help and advice.
 
Pendelton stock may be another good place to look. They make two or three vertical grip models. They make beautiful stocks.
 
I like the seekins stock shape better than the micky GW. Doesn't have as much drop at heel, has a flat comb vs positive sloping, has a higher comb, and has a better (closer to trigger) grip IMO.

I'd think there should be some out there on the market because dudes buy stuff for dumb reasons. Seekins isn't carbon fiber and has a kind of an ugly texturing matrix so some people spend more for a functionally worse stock so they can have the cool carbon fibers or a chassis like their bros on the gram..

What cartridge are you looking at? I think the standard short action ones have basic AICS bottom metal but I'm not sure the 6.5 PRC or Long action Magnums bottom metal would be compatible with the mesa because those carbon mags are little different.
 
Last edited:
noharleyyet said:
Pat, does Stockys make one for the Mesa?
Click to expand...
I recently bought a Stockies VG2 for my 6.5-300 and I wasn't blown away. Plus I installed it, put the gun in my safe for three months and when I took it out a few weeks ago to shoot I noticed a cm chip out of the stock...must have missed it when it arrived. Chapped me. I really like the seekins durability.
 
CoHunter1991 said:
I recently bought a Stockies VG2 for my 6.5-300 and I wasn't blown away. Plus I installed it, put the gun in my safe for three months and when I took it out a few weeks ago to shoot I noticed a cm chip out of the stock...must have missed it when it arrived. Chapped me. I really like the seekins durability.
Click to expand...
I like the stocky so far..it's my first vertical grip
Carbon Fiber VG/700 WSM
https://flic.kr/p/2pRuRHB
 
That does look nice. I should have called them and seen what they could do. I choose to just get salty ha. How's their customer service? I may try and reach out.
 
I've always been a fan of the seekins ergos. If looking at stockys, i think a guy would be hard pressed to find a better ergos than the rokstok but I don't think there are even any of the m700 inlets out in the wild yet so that might be a wait and see option. I really like the one i have on a tikka and will likely buy another once they are doing a little better on the production side.

Never had a vg2, the grip to trigger distance is too damn long for me to want to try on a tikka but it seems that it's closer on the 700 pattern. They look pretty solid.
 
Last edited:
CoHunter1991 said:
That does look nice. I should have called them and seen what they could do. I choose to just get salty ha. How's their customer service? I may try and reach out.
Click to expand...
Customer service was ok, at best. I did call with a few questions about inletting. The gal I spoke with assured me it'd be a drop in...and it 'almost' was. My smith made it work.
 
noharleyyet said:
Customer service was ok, at best. I did call with a few questions about inletting. The gal I spoke with assured me it'd be a drop in...and it 'almost' was. My smith made it work.
Click to expand...
I had the same experience and same outcome. that's why I never bothered reaching out over the chip.
 
CoHunter1991 said:
I had the same experience and same outcome. that's why I never bothered reaching out over the chip.
Click to expand...
Have three McMillan stocks but haven't purchased any since they sold. All three were seamless transactions, great communication, excellent product and fitment.
 
CoHunter1991 said:
Two Questions for everyone, does anyone know where I can buy a Seekins stock? I love the ergonomics and stiffness of them but cannot find them anywhere to buy and seekins does not sell them individually. Second, the Seekins PH2/ element is a Rem 700 clone correct? So the stock should fit most 700 clone actions? I am looking to buy and put my Christensen Mesa in one. Thanks for all the help and advice.
Click to expand...
The PH2 is a clone. Have one and absolutely love it. Also the magpul and accuracy international aics mags fit the standard stock on a PH2. I was actually looking into getting another mag to have and with more capacity than the standard 3 round mag the Seekins comes with.
 
You must log in or register to reply here.

Similar threads

CoHunter1991
WTB Seekins LA stock.
Replies
2
Views
296
CoHunter1991
CoHunter1991
W
WTS Seekins Havak Custom Bartlein Carbon 300wm
Replies
2
Views
912
Wind Gypsy
W
M
Christensen Arms Mesa 7mm
Replies
19
Views
4K
MT Super Puncher
M
Q
Anyone Make X-bolt Stocks?
2
Replies
31
Views
14K
fortunato
F
coleslaw
Sako 85 S grey laminate stock
Replies
3
Views
1K
YoungGun
YoungGun
Kenetrek Boots

Latest posts

Forum statistics

Threads
113,668
Messages
2,028,991
Members
36,275
Latest member
johnw3474

Share this page

Back
Top