antelopedundee
Well-known member
Anyone ever store powder in an empty DRY water bottle. Might sell a keg and may want to keep some back, but have nothing available/handy to keep it in.
POWDER STORAGE!
- Thread starter antelopedundee
- Start date
stevejfarms
Well-known member
tupperware etc.
Elkmagnet
Well-known member
A safety issue is static. The bottles used to sell powder are a compound plastic with an antistatic agent.
I would use only empty gun powder bottles. Then you know they are antistatic.
I would use only empty gun powder bottles. Then you know they are antistatic.
cahunter805
Well-known member
- Joined
- May 27, 2014
- Messages
- 2,527
I always keep 1-2 empty 1lb cans in my powder cabinet in case I need them for this exact purpose.
Arcola
Well-known member
This
And while we’re on the topic of powder storage, never store powder bottles or primers in a sealed structural container such as a steel ammo can. If a bottle of powder somehow ignites on your bench or in a wooden crate, it will burn. If a bottle of powder somehow ignites inside a steel ammo can, it is a bomb.
grizzly63
Well-known member
So storing powder in a fireproof fire cabinet is dangerous? Dang it. I wonder sometimes when I'm swishing around a bottle of powder making sure it is mixed well just how much static electricity i might be creating. Mixing leftover of last container with new container, usually bought same batch. I know whenever I drive an electric scissor lift around in a building accross carpet, it creates static electricity. Ouch!
antelopedundee
Well-known member
Storing powder in a metal safety cabinet like is commonly used in chem labs is quite alright and they can be readily grounded. An old non working refrigerator or freezer is great for this and they can be obtained for free.
Bambistew
Well-known member
How come powder kernels stick the side of the bottle? Isn't that static?
What ever you store it in, make sure labeled properly.
What ever you store it in, make sure labeled properly.
Elkmagnet
Well-known member
Pretty hard to eliminate all static electricity. Less is still better.
Try holding your powder bottle while grounding.
Try holding your powder bottle while grounding.
antelopedundee
Well-known member
As an aside my reason to repackage was I was interested in selling a couple kegs, but wanted to hold some back if it wouldn't be a deal breaker. Not having an empty powder bottles I looked for alternatives. Decided to try a dry empty rubbing alcohol bottle. The plastic funnel I used to pour the powder from a bottle into the alcohol bottle had grains sticking to it. When I poured the powder back into its proper container the alcohol bottle was a clean as it could be. I wonder if because of the flammable nature of rubbing alcohol that the suppliers use bottles with an anti-static additive.
NAHMINT
Well-known member
ALL my 2F,3F,and 4F is in GOEX metal containers....UMmmmmm, wonder if its time to worry......I DO keep fresh ''anti static '' dryer sheets in the box and on my powder horn ....I tie a piece of sheet on spout and back horn swivel while in the woods or at the range.
The smokeless stuff, not so much.
The smokeless stuff, not so much.
Elkmagnet
Well-known member
This is good practice when dealing with metal.
"Transferring a flammable from one metal container to another may result in static electrical sparks. To prevent the build up of static electricity and prevent sparks from causing a fire, it is important to bond metal dispensing and receiving containers together before pouring."
