Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
If it's a factory rifle with no mods, that may be as good as you're going to get.
In addition to the above advice:
1. Make sure you are letting the rifle cool down between shots.
2. Check your bullet seating depth. Your bullet should not be more than .001" off the lands and grooves.
The reason I was using a lead sled was to try to promote consistency in developing these loads. I wanted to take as much human error out of it as possible and have a dead steady rest. I will try the next batch both off of bags and without strapping the rifle barrel to the sled. It sounds like this could be the problem.
To each his own. Can't see developing good form while a rest holds the rifle. I've also read claims that the lack of movement in the rest stresses the stock. mtmuley
The reason I was using a lead sled was to try to promote consistency in developing these loads. I wanted to take as much human error out of it as possible and have a dead steady rest. I will try the next batch both off of bags and without strapping the rifle barrel to the sled. It sounds like this could be the problem.
"Claims" are always a problem. I have shot a lot of rounds with heavy rifles and light ones and have never had a stock issue. The rest moves. It is not rock solid. You have to reset after shooting.
Try it before passing judgment on "claims". Good form is developed from a solid rest, not standing off-hand and shooting. The lead sled is no different than good sandbags when developing good form. The only difference is that you are not getting pounded so much that you start flinching. Flinching does not promote good form. .
To each his own. Can't see developing good form while a rest holds the rifle. I've also read claims that the lack of movement in the rest stresses the stock. mtmuley