Whiskey Freak
Well-known member
- Joined
- Apr 15, 2020
- Messages
- 246
Anyone ever attempt to get in on this debacle? My wife wanted to buy me a knife and they were dropping the size I wanted. It dropped at 7pm, note my time stamp picture 
MKC drops.
- Thread starter Whiskey Freak
- Start date
Schaaf
Well-known member
No, I’ve always thought that company gives off strong d-bag vibes.
Potsie
Well-known member
^this^
Plus, I’ve got several acquaintances that are knife builders - I’d rather pay them 2x the money for 5x the knife.
Plus, I’ve got several acquaintances that are knife builders - I’d rather pay them 2x the money for 5x the knife.
NDGuy
Well-known member
- Joined
- Apr 26, 2018
- Messages
- 2,047
I wore out on MKC very quickly. Josh and co do nothing but complain constantly about how the world is out to get them.
Not to mention promoting and hanging around with some strange folks, only fans models etc
NDGuy
Well-known member
- Joined
- Apr 26, 2018
- Messages
- 2,047
On that note that knife was pretty sought after for some reason. The other drops are very easy to snag one
Word of advice, put a new handle on it. G10 suck
Last edited:
That’s pretty funny since all they’re really doing is putting putting handles on knives someone else is cutting for themOn that note that knife was pretty sought after for some reason. The other drops are very easy to snag one.
Word of advice, put a new handle on it. G10 sucks
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 3,808
I went thru my apprenticeship with Josh. We didn’t work together but would be at training functions. I never really cared for him for whatever reason. MKC blew up and he quit and now does that full time. I have a lot more respect for him now due to I have been at an event in the last few years that he hasn’t donated to. Even the sports banquet dinner here has a set of his knifes for auction. He has done a great job giving back to the state.
NDGuy
Well-known member
- Joined
- Apr 26, 2018
- Messages
- 2,047
That much is for sure, why I got some merch and knives in the first place.
It’s been the last few years I’ve scratched my head at some of the stuff being posted.
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 3,808
I don’t follow any of that and not about to start hating on anyone for hanging out with o.f. models.
Forkyfinder
Well-known member
- Joined
- Dec 13, 2023
- Messages
- 3,453
Hes a lineman right? Forgiven, or at the very least understood. Haha
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 3,808
Ya I think he finished the apprenticeship like a year ahead of me. I got told someone wanted a custom knife of some sort in a hurry and they wouldn’t give him the time off so he quit that day.
Whiskey Freak
Well-known member
- Joined
- Apr 15, 2020
- Messages
- 246
Ahh this is probably why people are just flipping them to people dumber than me spending twice the money for them.
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 3,808
I’m not one to wish ill on people but I hope they trip and fall with that
NDGuy
Well-known member
- Joined
- Apr 26, 2018
- Messages
- 2,047
Just weird to air out stuff like this on the internet imo.
Attachments
I know nothing about Josh or his knives and have never held one. Met him briefly years ago through the apprentice program at work. The folks on here are the only guys I've ever heard bitch about the quality of his knives though.
Seems like a very cool Montana company, built from the ground up, and employing a lot of folks in the area. He must be doing something right, as most folks rave about the quality.
Seems like a very cool Montana company, built from the ground up, and employing a lot of folks in the area. He must be doing something right, as most folks rave about the quality.
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 3,808
It’s a small world he probably thought it was best to face that issue head on rather than a rumor mill. Idk it’s his business I do wish him the best but you won’t see one in my pack
Cattleman
Active member
- Joined
- Mar 4, 2018
- Messages
- 134
MKC is overpriced trash IMO
rokslide.com
Disappointed by MKC or did I get a bad one?
Just recieved my first MKC knife and I'm pretty disappointed. Tip is not straight. Was ground on one side more then other, which caused the bevels to be uneven, not even close. Tried to take a couple of pics, but might not show verywell with the mirror finish. And there are lots of sander...
rokslide.com
NDGuy
Well-known member
- Joined
- Apr 26, 2018
- Messages
- 2,047
MKC is overpriced trash IMO
Disappointed by MKC or did I get a bad one?
Just recieved my first MKC knife and I'm pretty disappointed. Tip is not straight. Was ground on one side more then other, which caused the bevels to be uneven, not even close. Tried to take a couple of pics, but might not show verywell with the mirror finish. And there are lots of sander...
Montana Knife Company Stubhorn
Bought a Montana Knife Company Stubhorn. Overall it seems that it will be great hunting blade. I was really disappointed in the finish quality of this knife especially given its price range. Check out the pics. Their website shows lots of love for every blade, but I have yet to figure out how...
rokslide.com
NDGuy
Well-known member
- Joined
- Apr 26, 2018
- Messages
- 2,047
Totally agree and why I have supported before. Just has wore on me a bit..
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 3,808
Which is funny because almost 15 years later I can’t remember what rubbed me wrong with him. But I can respect how much he has given back to the state and would be more inclined to buy one now that in the past. Knives just aren’t my thing couple outdoor edges and a pack of blades is all i need
