Oct 3, 2007 #1 C cornfed Active member Joined Mar 19, 2006 Messages 1,105 Any body know the best way to clean them out.It appears that the tubing on mine has some foreign particles in it.
Any body know the best way to clean them out.It appears that the tubing on mine has some foreign particles in it.
Oct 3, 2007 #2 S scottymack New member Joined Dec 6, 2003 Messages 524 Location Arlington, TX I clean mine with a little lemon juice then rinse it real well. You might try some baking soda as an abrasive as well.
I clean mine with a little lemon juice then rinse it real well. You might try some baking soda as an abrasive as well.
Oct 3, 2007 #3 M Mac7 New member Joined Mar 14, 2007 Messages 737 Location Idaho I buy and use the nalgene tablets and they work well for me.
Oct 3, 2007 #4 S sreekers Active member Joined Dec 6, 2004 Messages 1,302 Use some Listerine and run it through. A lot of them disconnect completely as far as a hose, so run water through it. Prop open the bladder itself after you clean it. They also sell kits to clean it, and that is the easiest way to do it.
Use some Listerine and run it through. A lot of them disconnect completely as far as a hose, so run water through it. Prop open the bladder itself after you clean it. They also sell kits to clean it, and that is the easiest way to do it.
Oct 3, 2007 #5 E Erik in AK New member Joined Mar 28, 2002 Messages 676 Location not killing a ram I use my rifle cleaning rod. Detach the bladder and valve and run patches with bleach, then water, then dry. Soak the valve in bleach water and clean the bladder with soap and water and lightly stuff with 2 or 3 paper towels to air dry.
I use my rifle cleaning rod. Detach the bladder and valve and run patches with bleach, then water, then dry. Soak the valve in bleach water and clean the bladder with soap and water and lightly stuff with 2 or 3 paper towels to air dry.
