How to use the load self MR Metcalf

[Flatlander3]

How in the world do you use the load shelf on the new Metcalf. The MR video on you tube has slightly different shoulder straps where the clip off where i would have to unweave the straps and the gohunt loadself video shows a marshal that has a clip on the frame he undoes last that the met calf does not. So far I feel like I would have to unweave alot of straps and would not make sense to do. I feel like they would have this down, so thats why I need your help. I think I am a little slow on load shelves.

 

[Carl 9.3x62]

Yes you have to unweave the top two straps, which allows you to slide the bag off the top of the frame. Slide the meat onto the shelf, buckle the buckles back up and reweave the top straps back in place! That last step is very important.

 

[Deleted member 38069]

 

[fachries]

Yes you have to unweave the top two straps, which allows you to slide the bag off the top of the frame. Slide the meat onto the shelf, buckle the buckles back up and reweave the top straps back in place! That last step is very important.

+1

 

[Flatlander3]

Yes you have to unweave the top two straps, which allows you to slide the bag off the top of the frame. Slide the meat onto the shelf, buckle the buckles back up and reweave the top straps back in place! That last step is very important.

So you have to unweave the straps down by the belt and the shoulder straps? Got it to work, just wasn't thinking you would have to do that a total of 4 times. I like the layout of how you do it on the marshall better as shown in the video Boomerusaf shared.

 

[Carl 9.3x62]

So you have to unweave the straps down by the belt and the shoulder straps? Got it to work, just wasn't thinking you would have to do that a total of 4 times. I like the layout of how you do it on the marshall better as shown in the video Boomerusaf shared.

You shouldn't need to unweave the bottom straps by the belt, unless you want to completely detach the bag from the frame.

 

[Flatlander3]

You shouldn't need to unweave the bottom straps by the belt, unless you want to completely detach the bag from the frame.

So the two straps don't undo, directly above the small pocket and rifle butt sleeve? If I don't undo rhose I can't pull the pack over the frame

Is there any video or instructions on this?? Ive looked and everything out there is different layout or old design.

 

[Flatlander3]

Found it on the site. You are supposed to unweave 4 straps plus 6 buckles. Not a very good design imo.

 

[Carl 9.3x62]

Huh, my pack does not have those two bottom straps to unweave. Weird.

 

[Flatlander3]

I know. Appreciate the help though!

 

[Carl 9.3x62]

I know. Appreciate the help though!