Bigjay73
Well-known member
Anyone have a good at home setup they care to share?
Diy paper tune
- Thread starter Bigjay73
- Start date
Flatbrimmer
Well-known member
Cut the bottom out of a box and tape paper over the hole and a target behind the box by a couple arrow lengths.
Set the whole procedure up at eye level.
Set the whole procedure up at eye level.
elkantlers
Well-known member
Im not sure what you're asking, but what I do is take a cardboard box and cut out the front and back. tape some freezer paper to the front. shoot through it into a target at bow level.
Sheltowee
Well-known member
You can make a frame out of PVC and shoot through old wrapping paper held on by battery clips... or you could bounce over to RMS and spend less time and money in having a pro do it.
rjthehunter
Well-known member
I have an old coat rack that I clip old construction drawing sheets to. Big 2'x3' sheets of paper let you shoot a lot of holes before needing to replace it!
MtsPSU
Active member
I second this--I built one many many year ago and it's easy, cheap and get the job done.
Mark
Bigjay73
Well-known member
That would make far too much sense
Arcola
Well-known member
I made one out of pvc several years ago. Just clamp some butcher paper to it. Prior to that I repurposed a wire frame for those yard signs people like to put everywhere. Nice part about the pvc, is that I could build it to match my target height.
peterk1234
Well-known member
- Joined
- Oct 9, 2019
- Messages
- 649
I have a piece of osb board with a square cut out of it. Staple paper to it. Pick your choice of stand to hold it. I use my bike workstand.
Ever compared tears with construction paper vs freezer paper?
rjthehunter
Well-known member
I have not. The drawing sheets aren't construction paper though. Just normal white paper, but big lol
LuketheDog
Well-known member
This^ I just had Will do mine, picked it up last Thursday and it's shooting great now. I couldn't get a good paper tune to save my life before that, the timing was juuuuust barely off.
utah400elk
Well-known member
French tune works great for in the house. Close distances and works well. I always fallow up with a walk back tune but rarely ever have to move my rest after the first one.
Why would you have someone else tune it? Wouldn’t you want to tune it to the individual who is shooting the bow all the time?
LuketheDog
Well-known member
A bow is a machine like a rifle, nothing more. Tuning to an individual is not a thing, and if you're 'tuning' a bow to compensate for bad form then you're just messing up the bow, fix your shooting form instead...
Bigjay73
Well-known member
The only true bad form is not having the same form every shot. If you can replicate it consistently, it's not bad form. I mean, how many shooters have absolutely perfect form outside of professionals? I have to imagine that even with textbook form, there will be subtle differences between shooters, I'd rather tune my bow to me, but having someone else tune it is fine as well. No wrong way imo
How you hold bow vs the guy at store will be different(hence two different tunes). I guess imo I’d rather tune it to my form instead of someone else’s. I mean your tune can even change depending on your release( finger puncher vs handheld). Who says the dude at the store doesn’t have a flaw in his form but was able to get it to punch a hole through paper then you shoot it through paper and get a different result?
LuketheDog
Well-known member
I think you're both misunderstanding the meaning of a tune. An in-tune bow simply means the arrow comes off the rest straight and true, in my case the cam timing was slightly off and it was kicking the arrow up. It has nothing to do with what your grip is like or what kind or release you use. If you're not putting any torque on the bow during release/follow-through it doesn't matter what your form is (you can literally shoot a bow without your arms!), but if you're "tuning" your bow to compensate for a bad habits or inconsistent form then you are magnifying issues instead of solving them.
