Chains can get you out of trouble. But, they can definitely get you into trouble also. mtmuley
Chains for 23 tacoma
- Thread starter WildWill
- Start date
Wildabeest
Well-known member
<Insert pic of woman in chains>
dan.kirkpatrick
Well-known member
another posibility could be tire socks ,,believe it or not,they work pretty good in snow,,just dont let them freeze to the ground,,if they are snug they may work on the fronts,,ball upper ball joint clearance is tight though.id only run real chains on the rear axle.
WildWill
Well-known member
Always have a little E tool type shovel in the truck but Will make sure to bring a big boy shovel this time. I don't even own a snow shovel
.
MThuntr
Well-known member
Back when I had a bone stock Taco, I used some good V-Bars on the rear with plenty of clearance but the front didn't have room as many pointed out. You may be able to find some low clearance cables but knowing when to quit while you're ahead is probably better than tearing up steering components. There are situations where you don't have a choice but actively avoiding those situations is worth saving the headache.
Plus, no Taco is complete without at least 1 set of traction boards mounted to the side
Plus, no Taco is complete without at least 1 set of traction boards mounted to the side
Wyo_Jeeper
Member
Having spent more of my life than I care to admit chasing drilling rigs with all four tires chained up with v-bars I will echo what others have said; unless there is a D9 waiting to drag you the rest of the way out, chains are for self rescue.
With that said, some of the modern low profile designs are pretty awesome. https://www.konigchain.com/shop/au-en/konig-xg-12-pro-1.html
With that said, some of the modern low profile designs are pretty awesome. https://www.konigchain.com/shop/au-en/konig-xg-12-pro-1.html
Fire shovel.Always have a little E tool type shovel in the truck but Will make sure to bring a big boy shovel this time. I don't even own a snow shovel
SixPoint
Well-known member
If you run 235/85-r16 tires you can run standard chains on the front of your Tacoma without damaging anything.
Elkmagnet
Well-known member
To check fitment and practice installation spread the chains out in front of the tire with all of the tension adjustments on the outside chain. Drive 3/4 of the way onto the chain then wrap the long end over the tire. Drive 10-20 yards and check lightness.
If you have a lot of extra tag end links it may be beneficial to cut them off BUT always leave a couple extra because in the snow your hands will be cold and you won't likely get them as tight as you do test fitting.
As someone who chains up 10 to 30 times a year if your "truck" can't fit chains on the front you own a car.
Chains in the rear are less than half as effective as chains on the front.
If you have a lot of extra tag end links it may be beneficial to cut them off BUT always leave a couple extra because in the snow your hands will be cold and you won't likely get them as tight as you do test fitting.
As someone who chains up 10 to 30 times a year if your "truck" can't fit chains on the front you own a car.
Chains in the rear are less than half as effective as chains on the front.
