Stay Sharp
Well-known member
I took my first animal with a bow and arrow 46 years ago and was hooked ever since. During that time, my focus and fascination has always been on the only part of our gear actually responsible for killing the animal. Broadheads have been my passion for almost 5 decades.
We are a few days from the ATA and like every year, there will be broadheads unveiled claiming to be a new idea and rarely is that the case.
What most dont know is that the first commercially available (and print advertised) broadhead was the 1878 Peck and Snyder.
www.bowhunting.net
Or that the first mechanical broadhead was the sold in 1950's. There is debate about the first replaceable blade broadead. Wasp claims to be the first But the Fred Bear Razorhead had a replacable bleeder blades in the early 1950's (more on that)
And the Little Shaver utilized shaving razor blades that could be inserted into the broadheads as the main blade and the blades replaced as needed.
Ive collected broadheads from the beginning of my love of bowhunting and started hunting with the Bear Razorhead lists Edward J. Henckle as the inventor. Link to PDF of that patent below.
www.freepatentsonline.com
I have more of the bear heands than any other head in my collection. Here are some of them not mounted on arrows.
Unless you collect, you wont understand the significance of these which are some of the earliest and can be identified by the blade vent and the not yet flattened connection point where the ferrule meets the blade. I only have 3 of them.
And still more that need some attention. In that mess you can see a couple more blade vent varsions and the flattened joint at the front of the ferrule.
As time allows, I build cases to hold and display my heads but I need to build several more such display cases. Only one of each specific head goes in a case but I have many multiples of many of the heads, in some cases, dozens of a specific head.
Some of my most treasured heads are the 1930's Roy Case heads since he was the first broadhead collector, The person responsible for the first archery deer season, is also from Wisconsin and was responsible for the Wisconsin Bowhunters Association (the nations oldest and largest state bowhunting org and because I sit on the board of the Wisconsin Bowhunting heritage Foundation Museum and Roy's son Caleb was on our board until his recent passing.)
Roy would sell you 10 of his heads for a dollar.
My 1940's O.A. Norland
Some MA3 and Whiffen Bodkins (Both are Wisconsin made broadheads)
Wisconsin and then Michigan were the real birth places of mass produced broadheads and while this case is not currently up to date, it does show many of the early WI broadheads. This display case is maintained by us at the WBHF museum.
In fact we catalog many many heads there. This in only one side of a couple multi sided rolling cases full of broadheads.
We are a few days from the ATA and like every year, there will be broadheads unveiled claiming to be a new idea and rarely is that the case.
What most dont know is that the first commercially available (and print advertised) broadhead was the 1878 Peck and Snyder.
Fred Lutger Finds The Rare 1878 Peck & Snyder Broadhead
The Rare 1878 Peck & Snyder Broadhead Recently I attended the Compton Traditional Rendezvous hosted by the Compton Traditional Bowhunters
www.bowhunting.net
Or that the first mechanical broadhead was the sold in 1950's. There is debate about the first replaceable blade broadead. Wasp claims to be the first But the Fred Bear Razorhead had a replacable bleeder blades in the early 1950's (more on that)
And the Little Shaver utilized shaving razor blades that could be inserted into the broadheads as the main blade and the blades replaced as needed.
Ive collected broadheads from the beginning of my love of bowhunting and started hunting with the Bear Razorhead lists Edward J. Henckle as the inventor. Link to PDF of that patent below.
Arrowhead
Complete Patent Searching Database and Patent Data Analytics Services.
I have more of the bear heands than any other head in my collection. Here are some of them not mounted on arrows.
Unless you collect, you wont understand the significance of these which are some of the earliest and can be identified by the blade vent and the not yet flattened connection point where the ferrule meets the blade. I only have 3 of them.
And still more that need some attention. In that mess you can see a couple more blade vent varsions and the flattened joint at the front of the ferrule.
As time allows, I build cases to hold and display my heads but I need to build several more such display cases. Only one of each specific head goes in a case but I have many multiples of many of the heads, in some cases, dozens of a specific head.
Some of my most treasured heads are the 1930's Roy Case heads since he was the first broadhead collector, The person responsible for the first archery deer season, is also from Wisconsin and was responsible for the Wisconsin Bowhunters Association (the nations oldest and largest state bowhunting org and because I sit on the board of the Wisconsin Bowhunting heritage Foundation Museum and Roy's son Caleb was on our board until his recent passing.)
Roy would sell you 10 of his heads for a dollar.
My 1940's O.A. Norland
Some MA3 and Whiffen Bodkins (Both are Wisconsin made broadheads)
Wisconsin and then Michigan were the real birth places of mass produced broadheads and while this case is not currently up to date, it does show many of the early WI broadheads. This display case is maintained by us at the WBHF museum.
In fact we catalog many many heads there. This in only one side of a couple multi sided rolling cases full of broadheads.
