Nicoli7153
Well-known member
- Joined
- Sep 9, 2021
- Messages
- 518
Accuracy improves with the ramrod removed when shooting, has to do with barrel harmonics.
Adult Onset Idiot
- Thread starter MTGomer
- Start date
Addicting
Well-known member
Why put something in it you just have to clean out properly to make it function?Never once had issue with Bore Butter.
If you clean out your barrel properly there won't be powder sticking.
How much butter does it take to make a smooth bore?
Hem
Well-known member
I get your point but honestly isn't care and maintenance an ongoing process with blackpowder barrels?
slatebuilder
Well-known member
- Joined
- Jan 27, 2018
- Messages
- 624
Hell screw a broad head on that thing and leave it in the barrel
Nicoli7153
Well-known member
- Joined
- Sep 9, 2021
- Messages
- 518
I run at least one fouling shot before I load for a hunt, after swabbing a barrel that has been in storage.
elkduds
Well-known member
It is fascinating to watch that rod fly when you touch it off, though. Slight increase in recoil as well
Nicoli7153
Well-known member
- Joined
- Sep 9, 2021
- Messages
- 518
Seriously guys. Maybe I should have written that better. What I meant was that if you don't put the ramrod back in the holders underneath the barrel, it should improve accuracy. Just gotta remember not to leave the rod behind.
But I'm using a cap, patched ball and FF Triple 7. Used to use GOEX FF until it became too hard to come by. Might be different in the modern muzzleloaders
Last edited:
Addicting
Well-known member
Not so much when you switch to BH209, but with anything else yes.
I used boiling water with dawn and a bronze brush. Run a dry patch till it comes out dry and then spray the inside heavily with Rem oil. Run a dry swab or two thru and it’s done.
Same process when I used bore butter but it always collects in the grooves and you can never get it all out.
Hem
Well-known member
I have done the same^
Though I have hunted blackpowder for decades, I typically "maybe" shoot at a live animal once a year. So after a few practice shots to verify things are still okay, I don't mess with the barrel.
The in-line stays loaded for the week I might hunt with it. The traditional I almost always fire each day, because I have more faith in fresh powder from day to day, so I will make one pass with a swab. No heavy cleaning until after the season.
One of the reasons I prefer the butter for the traditional is because I feel it doesn't permeate the area just under the nipple and the powder stays bone dry when loaded. Not convinced that oil can be fully absorbed by a swab in that hard to reach area.
Admittedly, I use butter sparingly, as it is.
Works for me, anyhow.
Nick87
Well-known member
Maybe I did something wrong but anything I applied that shit to corroded like no other?Never once had issue with Bore Butter.
If you clean out your barrel properly there won't be powder sticking.
How much butter does it take to make a smooth bore?
Hem
Well-known member
Can you explain further...what corroded?
Nick87
Well-known member
This was years ago but iirc I coated the barrel with a little bb after cleaning and when I took it back out to shoot months later the barrel looked as if I had shot it about 25 times.
Nick87
Well-known member
That bh209 is where it's at. All I ever used was pellets until trying that in my step sons gun and was like wow I can't get that time or money back from that garbage.
Hem
Well-known member
All I have ever used is pyrodex.
I have noticed the bb changes color after a winter but I never considered there to be a corrosion problem.
But I'm open to try a new tactic...oil this winter to experiment.
I mean the traditional I have is 35 years old...if I take good shots with open sights the conical is dead nuts on left to right and 4" low at 100 yds....everytime.
Nick87
Well-known member
Gotta use what works, I've got an old traditional Hawken style from my grandpa. Always wanted to do some hunting with it but I don't really know much about how to properly care for them. Need to change that. Always wanted to kill an elk with a Hawken, gonna happen someday.
Just wondering if you were shooting black powder or something that is corrosive and didn't get it cleaned out all the way?
Nick87
Well-known member
Pyrodex pellets and it's very possible but honestly it was so long ago I vaguely remember.
I wasn't familiar with that particular rifle; ignition with mag rifle primer, 200 grain max powder charge....shooting 300 grain projectile...can you say YEEHAW! That load will hit hard at both ends. Remington claims 2400fps with 200 grain sabot. Impressive rifle.
When I think of the evolution the last 25 yrs from percussion caps and jamming roundballs/conicals to in-lines using 209's pushing sabots ...with scopes, man we're getting spoiled. And I like it.
When I think of the evolution the last 25 yrs from percussion caps and jamming roundballs/conicals to in-lines using 209's pushing sabots ...with scopes, man we're getting spoiled. And I like it.
Nicoli7153
Well-known member
- Joined
- Sep 9, 2021
- Messages
- 518
I recall when pyrodex first got popular recommendations were not to use solvents as a cleaner for pyrodex because it would cause corrosion. Been a while but I believe Hoppe's #9 was mentioned. Don't know if it applied to any other cleaners
Dwreckers
Well-known member
I thought the thread title was Adult Onesies Idiot… kind of sad it wasn’t 
