LNGBOWFLYER
New member
So long story short I recently figured out my DL is not 28" but its 26.5". Went to get some more lessons and have shot for 6 years, have done 3D and am a pretty good shot so thought nothing of it. Guess your never to "experienced" to learn something. Anyways so I am going to have to change my set up based on this. I did a ton of research and have settled on three set ups. So I am curious to know which setup you think I should use.
I had 3 requirements for my set up. It had to be at least 400grains, shoot at least 265fps and have a FOC at least 11% The Goldtips have more KE but less FOC which is more important for penetration. Which is what I care about most. Penetration.
The bow set up is a 2009 Hoyt Alphamax 32. My draw length is 26.5" and its set up at #67 draw weight. The broad head will be a slick trick standard.
#1 Easton Axis.
400's 9.0 GPI.
+/- 0.003" +/- 2.0 grains
125 grain. head
Wt 403 grains.
Fps. 265.
KE 62.86.
FOC 14.05%
#2 Gold Tip Kinetic XT
400s 9.5 GPI
+/- 0.002" +/- 1.0 grains
100 grain head
WT 401 grains
Fps 266
KE 63.02
FOC 12.01%
#3 Carbon Express Mayhem
250s 8.9 GPI
+/- 0.0035", +/- 1.0 grains
125 grain head
WT 400 grains
Fps 266
KE 62.86
FOC 13.77%
I had 3 requirements for my set up. It had to be at least 400grains, shoot at least 265fps and have a FOC at least 11% The Goldtips have more KE but less FOC which is more important for penetration. Which is what I care about most. Penetration.
The bow set up is a 2009 Hoyt Alphamax 32. My draw length is 26.5" and its set up at #67 draw weight. The broad head will be a slick trick standard.
#1 Easton Axis.
400's 9.0 GPI.
+/- 0.003" +/- 2.0 grains
125 grain. head
Wt 403 grains.
Fps. 265.
KE 62.86.
FOC 14.05%
#2 Gold Tip Kinetic XT
400s 9.5 GPI
+/- 0.002" +/- 1.0 grains
100 grain head
WT 401 grains
Fps 266
KE 63.02
FOC 12.01%
#3 Carbon Express Mayhem
250s 8.9 GPI
+/- 0.0035", +/- 1.0 grains
125 grain head
WT 400 grains
Fps 266
KE 62.86
FOC 13.77%
Last edited: