T Bone
Well-known member
Hi all.
Looking to sell this very nice custom Rem 700 chambered in 22-250. Somebody put a whole lot of $ and time into the build.
Action, bolt and bottom metal is blued Rem 700 short action. Serial # 62627xx. Bolt has mild gas marks (see pics)
Barrel is a Christensen Arms carbon fiber. 26" in length. "GM Avenging Angel" is inscribed on the passenger side (see pics). To my eye, rifling is very sharp and bright. ($800 value plus install)
Trigger is a Jewell, with bottom safety, crisp at about 1 pound. Jewell triggers are exceptional.
Stock * I believe* is a factory Remington made by HS Precision, no palm swell. Aluminum bedding block and pillar bedded. LOP = 13.25" over thin pad.
Base is included. 20 MOA.
I mounted a scope, zeroed it at 200 yards over the hood of the truck with cheap PPU ammo and took it coyote hunting. It's very accurate from a hunting perspective, but I have never shot it off the bench and tested for accuracy.
I purchased it as-is from a local gun store. They claimed the action/bolt/barrel were squared and blue printed, but there is no documentation to prove that.
Stock has some minor scratches from use. They don't show well in the pictures.
Please let me know if you have questions, and I'll do my best to answer.
Cross-posted.
$1150 shipped in hard plastic case to your FFL from Non-FFL.
Looking to sell this very nice custom Rem 700 chambered in 22-250. Somebody put a whole lot of $ and time into the build.
Action, bolt and bottom metal is blued Rem 700 short action. Serial # 62627xx. Bolt has mild gas marks (see pics)
Barrel is a Christensen Arms carbon fiber. 26" in length. "GM Avenging Angel" is inscribed on the passenger side (see pics). To my eye, rifling is very sharp and bright. ($800 value plus install)
Trigger is a Jewell, with bottom safety, crisp at about 1 pound. Jewell triggers are exceptional.
Stock * I believe* is a factory Remington made by HS Precision, no palm swell. Aluminum bedding block and pillar bedded. LOP = 13.25" over thin pad.
Base is included. 20 MOA.
I mounted a scope, zeroed it at 200 yards over the hood of the truck with cheap PPU ammo and took it coyote hunting. It's very accurate from a hunting perspective, but I have never shot it off the bench and tested for accuracy.
I purchased it as-is from a local gun store. They claimed the action/bolt/barrel were squared and blue printed, but there is no documentation to prove that.
Stock has some minor scratches from use. They don't show well in the pictures.
Please let me know if you have questions, and I'll do my best to answer.
Cross-posted.
$1150 shipped in hard plastic case to your FFL from Non-FFL.
