CDS Install Results

[noharleyyet]

Two zeroing shots @ 100 w/old turret, remove factory dial, set CDS to 0 & tighten 3 ea. .050 Allens for switchout, Printed zero @ 100 w/ CDS installed, 1.125" high at 200 setting, 3.25 high at 300 setting. Same hole 10 ring when set back to 100 yd zero set point. 100 Zero 800 yd top.

Shoot at distances next session.

 

[AZ402]

Looks like it worked out pretty good!

 

[noharleyyet]

Looks like it worked out pretty good!

Blind hog principle Stan.....so far.

 

[Joe Hulburt]

Nice to see somebody is having success getting a CDS scope dialed in. Still having issues getting enough adjustment on mine to turn up to 550 yards. I thought I had it figured with out with a 15 MOA one piece Leupold base but when it arrived I learned that the new Model 70's have WSM actions as opposed to the old short actions.

I take it you have plenty of room to adjust to maximum distance on the dial? Did you have to use a special angled base? You dial goes to 800 yards with a 100 yard zero?? Must be a flat shooting rifle! My .308 will only go to 550 (in theory!) with a 100 yard zero.