Any recommendation for 30.06 ammo

[LoveBirdDogs]

Any recommendation on 30.06 ammo (grain and type) for Pronghorn?

 

[Dougfirtree]

Since I'm trying not to shoot lead at critters these days, I'll suggest you use a 150 grain mono, like a Barnes TTSX, Nosler E-Tip, etc. Winchester makes an all-copper 150 load that is quite affordable too. Just make sure you're not shooting so far that impact velocity is much below 2200 fps.

 

[rideold]

I use a Barnes 165 gr TTSX for everything. The round is more accurate than I am.

To clarify...I shoot a mid 90s Remmy 700 BDL.

 

[WildWill]

Whatever grain nosler partition shoots best out of your gun.

 

[6mm Remington]

A 150 gr. Nosler Partition, Accubond, or E-tip would work very well. So would the same three in 165 gr. weights.

H4350 and IMR4350 are two good powders to load for the 30-06 with most bullet weights also.

When working up a load stick with one brass make. Sort your Winchester, Federal, and Remington brass before loading. Even changing brass can make a difference in a great shooting load and one not so great.

 

[ClearCreek]

Any recommendation on 30.06 ammo (grain and type) for Pronghorn?

Pronghorn are rather small animals, so my opinion is all you need is an accurate (for your rifle) cap and core bullet. Remington Core-lokt or Hornady Interlock bullets will do just fine. Hit them in the right spot and you will be eating antelope.

ClearCreek

 

[LoveBirdDogs]

Pronghorn are rather small animals, so my opinion is all you need is an accurate (for your rifle) cap and core bullet. Remington Core-lokt or Hornady Interlock bullets will do just fine. Hit them in the right spot and you will be eating antelope.

ClearCreek

Thank you for the info. I have hundreds of reloads most of them are 165 GR BTSP rounds. I have about 200 prepped brass waiting for reloading so I wanted to update what tip I use. I finally ran out of Hornady #3045s.

 

[6mm Remington]

Thank you for the info. I have hundreds of reloads most of them are 165 GR BTSP rounds. I have about 200 prepped brass waiting for reloading so I wanted to update what tip I use. I finally ran out of Hornady #3045s.

If you already have hundreds of 165 gr. Boattails loaded (of any flavor), then you are all set if your rifle shoots them well. A 165 gr. bullet is all I use in my 30-06 for coyotes, antelope, deer, bear, elk. I feel completely confident in it.

 

[Buffs35]

Whatever you already have it dialed in for. If you shoot a heavier round for other animals, just keep it, the pronghorn won't complain.

 

[Losing_Sanity]

Whatever you already have it dialed in for. If you shoot a heavier round for other animals, just keep it, the pronghorn won't complain.

Probably no truer statement...

 

[Tikka06]

I shoot 165 Accubond’s at everything I hunt. They worked great on my pronghorn.

 

[LoveBirdDogs]

I shoot 165 Accubond’s at everything I hunt. They worked great on my pronghorn.

I have been looking at the resin tips for my reloads in the future. I have an old set of Hornady reloading books. I am going to have to find loading charts for these new tips.

 

[Guy]

I have been looking at the resin tips for my reloads in the future. I have an old set of Hornady reloading books. I am going to have to find loading charts for these new tips.

Never heard any bullets called "resin tips" before, but I'd guess you're talking about Nosler Accubond or Ballistic Tip bullets?

If so, you're in luck, Nosler has put their reloading data online, free:

Nosler Load Data

Explore the world of Nosler, renowned for crafting the finest bullets, ammunition, rifles, and brass. Discover our extensive lineup, including Partition, AccuBond, E-Tip, Ballistic Tip, Custom Competition, and more. Experience superior quality and performance with Nosler products.

load-data.nosler.com

I've used the 165 grain Nosler Ballistic Tip at 2940 fps from my 30-06, via H4350, on mule deer, antelope, elk and black bear with quick kills and complete satisfaction.

Regards, Guy

 

[3855WIN]

If you just want to load something, try a 125 grain bullet.

 

[Rodzilla]

All my antelope bucks have been shot with 150 grain federal softpoints. all shots between 150 and 250 yards and all dropped in their tracks. Yet to recover a bullet. There are better bullets out there, but this is the one my gun (Rugger M77; 30.06) likes to shoot well with them. There are better and more expensive bullets out there, but I rather pay $20 for a box and get results than pay $40-$50 for the same results. Just my two cents. Id suggest buying different brands with different bullet grains and see how they shoot in the gun you are planning to use.

 

[Gunner46]

^^ What 'Zilla said. 'Lopes aren't that big, even the Big ones. Anything from a good 125 to a 165 will work nicely, as long as you can shoot it well in Your rifle. Might be a good excuse to explain to the wifey that the '06 is just too d@nm big for "lopes and that you neeeeed a 243 Win !

 

[CountingCoo]

I went all copper years ago and have never looked back. I shoot 200grn TSX bullets at everything from antelope to elk. A high shoulder shot with a 200 grain TSX results in less meat damage Than a 130 grain lead core bullet.

 

[Gunner46]

I went all copper years ago and have never looked back. I shoot 200grn TSX bullets at everything from antelope to elk. A high shoulder shot with a 200 grain TSX results in less meat damage Than a 130 grain lead core bullet.

What cartridge are you shooting that enabled you switch from a 130 soft point to a 200 gr copper?

 

[CountingCoo]

What cartridge are you shooting that enabled you switch from a 130 soft point to a 200 gr copper?

I don’t shoot 130 grain soft points at all.

 

[JLS]

A high shoulder shot with a 200 grain TSX results in less meat damage Than a 130 grain lead core bullet.

A shot right behind the juncture of the scapula and humerus with any kind of hunting bullet will result in even less meat loss.