6mm Remington & Nosler

[6mm Remington]

I can't be the only 6mm Remington fan out there, please tell me I'm not!! Nosler makes some great brass and ammunition for a lot of different cartridges that are a little off right of center and I don't see how they could possibly be as popular as the 6mm Remington. I've been pestering them for a few years to make 6mm Remington brass and loaded ammunition. Anyone else out there that shoots 6mm Remington and would like to see it too? Maybe if we pester them enough they will finally start making some for us.

Here's just a sampling of some that they do make brass for that are probably hard to find brass for and not that popular.
17 Rem
221 Fireball
6.5 Grendel
264 Win Mag
7mm SAUM
7mm STW
7mm RUM
300 AAC BLK
300 SAUM
350 Rem Mag
9.3x74R

 

[Bgriffith]

I would love to see them make some 6mm Rem. And 17 fireball and 22 and 6mm ppc!

 

[6mm Remington]

I would love to see them make some 6mm Rem. And 17 fireball and 22 and 6mm ppc!

I think I saw the 17 Fireball on their list!!

 

[Panda Bear]

David, the last time I checked Nosler were of no help to me

275 H & H
348

 

[Bgriffith]

Hmmmm just checked they did make them and according to midway it was a limited run have to see if I can track some down! 275 h&h flanged? Or is that one the same as the 7x57?

 

[Panda Bear]

no the 7 x 57 is the same as the 275 Rigby. The 275 H & H is a necked down 375 H & H. I had the 300 H & H and 375 H & H so someone gifted me the 275 H & H so I would have all three. It is similar to the 7mmRem ballistically. We are able to get bullets for both the 348 and 275 H & H from Woodleigh. I only use the 275 H & H when we travel south for sheep and goat or for a dedication wolf elimination project., so it is not used regularly

Actually, I probably would not have commented at all, but was giving David a hard time and now wanted to respond to your post

 

[mrjashu]

Isn't the 6mmRem a necked down 257 Roberts?
If so you can use that Nosler brass and make your own

Nosler - Worlds Finest Bullets, Ammunition, Rifles & Brass

Nosler, the world's finest bullets, ammunition, rifles, & brass. We manufacture Partition, AccuBond, E-Tip, Ballistic Tip, Custom Competition and much more.

shop.nosler.com

 

[6mm Remington]

Isn't the 6mmRem a necked down 257 Roberts?
If so you can use that Nosler brass and make your own

Nosler - Worlds Finest Bullets, Ammunition, Rifles & Brass

Nosler, the world's finest bullets, ammunition, rifles, & brass. We manufacture Partition, AccuBond, E-Tip, Ballistic Tip, Custom Competition and much more.

shop.nosler.com

Yeah I know I can do that but I would like the case stamp to be 6mm Remington. Winchester and Remington both still load ammunition and have brass available periodically but I'd just like to see some Nosler Brass as they make some good stuff!

 

[6mm Remington]

David, the last time I checked Nosler were of no help to me

275 H & H
348

I appreciate you picking on me. I'd feel left out if you didn't!

 

[Bgriffith]

no the 7 x 57 is the same as the 275 Rigby. The 275 H & H is a necked down 375 H & H. I had the 300 H & H and 375 H & H so someone gifted me the 275 H & H so I would have all three. It is similar to the 7mmRem ballistically. We are able to get bullets for both the 348 and 275 H & H from Woodleigh. I only use the 275 H & H when we travel south for sheep and goat or for a dedication wolf elimination project., so it is not used regularly

Actually, I probably would not have commented at all, but was giving David a hard time and now wanted to respond to your post

Oh that’s right! Sounds like an interesting round. I’m a sucker for interesting rounds. Wish Nosler would do a run of 7x61 also

 

[Dan O]

FYI Starline is making 348 brass

 

[1100RemingtonMan]

Yes I am a 6mm Rem fan and would like Brass from Nosler. I would also like to see a 95gr AB in .243 also.

 

[BuzzH]

Yes I am a 6mm Rem fan and would like Brass from Nosler. I would also like to see a 95gr AB in .243 also.

I'd like to see a 105 grain accubond in .243