Search results

  1. J

    25-06AI Dies needed

    Mike, I was surfing and found a full die set from Redding for $57.00. The site was Lock, Stock, and Barrel. Just thought you might want to check it out!!:D http://www.lockstock.com/ Jude;)
  2. J

    25-06AI Dies needed

    Mike, here is the stock # from RCBS .25.06 Improved 40 degree #56146 $119.95 for the dies set and $76.95 for the neck sizer die if that is all you need. Phone #1-800-533-5000 6:30 AM till 4:00 PM Pacific time. Jude;)
  3. J

    Tumbler

    Here is another Blue one from Midway. Jude;)
  4. J

    22-250 AI load info

    Thank-you WD, I will check it out. I have had this for about 2 years and I'm still looking for a good load. Although it shoots less than 3/8" groups at 100yds., I still am searching for that ultimate load (one hole groups). I think I should have went with a 1 in 10" or 1 in 9" barrel! I like the...
  5. J

    22-250 AI load info

    Pecos, I just picked up 2 boxes of 60gr. Hornady V-Maxs for my 22-250 AI. Did you have any loads that would be good to start with H 414? I have been checking around and found some with IMR 4064 and may have to buy a pound soon. Good shooting, Jude;)
  6. J

    6.5-06 Loads & Chrony Data

    Hey WDSWIFT, I have a question for you down in (FIRESIDE (A PLACE FOR FRIENDS) / ANYTHING GOES). If you don't want to meet up, or can't, I still would be interested in some local places of interest in Columbus if you know of any. Thanks in advance, Jude;)
  7. J

    .338 Win. Mag Loads

    Guys, according to the Alliant web site the MAX Load for RL 22 in the 225 Barnes is 73.0gr. Here is the data that was posted. .338 Win. Mag, 3.335 24.0" barrel, Win. W.L.R. primer, Reloder 22 73.0, 2,705 Fps., c.u.p. 46,900. It also states to reduce loads by 10% and work up...
  8. J

    What is your hunting rig?

    Anaconda, your not the only one who owns a Jap Rig!! I have a Nissan Frontier 2000 Crew Cab. The 4 doors is nice to haul around the family.... Jude;)
  9. J

    .338 Win. Mag Loads

    1_pointer, just finished testing some reloads out of my .338 (200gr. N.B.T.) and had good luck with AA 3100. I started at 73.0gr and MAXED out at 75.0gr stepping up in .5gr. increments. I hit the 3/4" group at 100yds. with 74.5gr. I also tried N 160 and had good results but not like the AA...
  10. J

    .338 Win. Mag Loads

    1_pointer, I forgot to ask, how was your grouping with this load? I was looking in the Nosler handbook and it had a note that 69.0 gr. of IMR 4350 did the best for that powder. Then again all rifles shoot different and that is just a guide line. As soon as I can get some extra money together I...
  11. J

    .338 Win. Mag Loads

    1_pointer, it is most likely due to the bullet velocity. Your factory shells are most likely a little hotter than your reloads were. Once you start increasing the charge it may start moving the impact point on your target. I was going to start loading with the 200 grain NBT first myself. Most...
  12. J

    First Reloads...

    1_pointer, First of all I would reccomend buying a caliper to measure your reloads. You can use a factory round to set your dies but I prefer to jump my bullets to about .010 from the rifling. First put a factory loaded shell into your shell holder, then with the die just started in the press...
  13. J

    .338 Win. Mag Loads

    1_pointer, did you ever make it out to the range? I'm interested in hearing how your rifle shot. I recently recieved a Win Model 70 Pre-64'.338 Win Magnum from a deceased relative. My son was also given a Pre-64' right after he died because he promised it to him as soon as my son got a hunting...
  14. J

    22-250 AI load info

    Pecos, I think I will give those 60gr. V-Max a try. I have been using H 414 with good results and RL-15 has been good too. I will keep you posted. Jude;)
  15. J

    22-250 AI load info

    Pecos, I have a 22-250AI and don't regret having my rifle rechambered from the 22-250. The only regret I do have is not having it rebarreled with a faster twist. It has a 1 in 14" and haven't tried the heavier bullets as of yet to see how they shoot in it but would like to try the 60 grainers. I...
  16. J

    ? on load data......

    Sorry Calif. Hunter, I should have put this here in the first place. The reason I didn't was I was checking the rifle section and then without thinking posted the question.... Thank-you Fatman and Dan for you quick response, I found the data listed in the Nosler Handbook. One of my relatives is...
  17. J

    ? on load data......

    Does anyone know where I can get some load info on the .30-.338 Win Mag. Any help would be much appreciated. Jude;)
  18. J

    Polishing brass

    Anaconda, I first throw my brass in the tumbler using walnut for about 20 min., Then resize. Then I put the brass back in the tumbler using corn cob for about 1 hour to get all the sizing lube off. It may be a lot more work but this way I keep my dies clean and the brass is free of lube.(they...
  19. J

    favorite shotgun used for grouse

    I use a Remington 1100Lt 20 ga. with a 23" Barrel and custom installed Briley thin wall choke tubes, either with #71/2 or # 6's. The thick cover here in Norteast Pa. you need a quick and light swinging shotgun. ;)
  20. J

    25-06 and 270 - R.I.P.

    Bush Baby, I have to agree. I'm on my 2nd 6.5-06 thanks to Danr55 and his S/S model 70 action!! I have a lot of people at the range coming over to me to see what I'm shooting also. Thanks Dan....... ;)

Latest posts

Forum statistics

Threads
114,311
Messages
2,052,309
Members
36,548
Latest member
Prodeoetpatria

Share this page

Back
Top