p_ham's latest activity
-
p_ham replied to the thread To Flute or not to Flute?.We're using an X-Caliber barrel, which they're fluting. I've had extremely good performance with their barrels. -
p_ham replied to the thread Pedersoli Hawken Peep Sight Mounting & Compatibility.Drill and tap a hole perpendicular to the windage screw that would allow a set screw to be tightened against the diopter body. You can...
-
Took the page from the USPS website in to the clerk today, he read it, and said "well I'll be darned..." Long time USPS employee, and...
-
Sent a rifle today, was at my local post office and they were clueless. I pulled up Section 432 from above and walked the clerk through...
-
p_ham replied to the thread Shipping firearms via USPS.I usually have clients screenshot the usps regs on their phone just in case they run into problems during drop off.
-
Believing book velocities is laughable when powder charges are the same. Like comparing a 243 and a 6mm creedmoor and saying the 6mm...
-
p_ham replied to the thread Ladder test interpretation.How many shots on the barrel? Virgin brass or fire formed?
-
Final ruling...
-
p_ham replied to the thread Winchester 1886 50-100-450.Funny story, that was a real phone number here. I think it's disconnected now.
-
For 55K I'm posting 867-5309
-
p_ham replied to the thread 45-70 .457 Conversion.It's just a 45-70 with a case length of 2.21, and an oal of 2.66. It's still .458 cal.
-
I’d advise anyone that has one if they ever have an issue to tell them you are shooting factory loads. When mine blew up silenco didn’t...
-
p_ham replied to the thread Suppressor help.1/2-28 is fine for 7mm. Some suppressor manufacturers site possible side load weakness if the rifle is dropped on the suppressor, on...
-
p_ham replied to the thread 45-70 .457 Conversion.I personally don't think it's worth the effort. Ballistic gains are marginal if any, and shotshells out of a rifled barrel are very...
-
Seen at the sheep show!
